PDA

View Full Version : dtc 18057 in skoda fabia 2008



pasupathy
28th February, 2012, 02:00 PM
i found dtc 18057 in my skoda fabia but my car is not with abs i cant also erase dtc & mil light of ecm is on . how to erase please help:manutop:

oldford
28th February, 2012, 02:14 PM
What do you use to read the code?

pasupathy
28th February, 2012, 06:23 PM
i use launch x-431 gx3

oldford
28th February, 2012, 06:52 PM
Try reading codes under EOBD/OBD2. Let's see if you get the same fault (P1649).

pasupathy
28th February, 2012, 07:15 PM
sir i read in that also showing P1649 & P1653 but cant erase mil light is on

pasupathy
28th February, 2012, 07:58 PM
sir i also got vas 5054a in that also same problem

smokey08
28th February, 2012, 08:06 PM
Try changing the soft coding in 19 can gateway. look at number then minus 2 from it.

oldford
28th February, 2012, 08:08 PM
The fault codes would have fooled me. I would have been searching for the Abs/Asr/Esp.

smokey08
28th February, 2012, 08:26 PM
The fault codes would have fooled me. I would have been searching for the Abs/Asr/Esp.

He says the car has not got ABS so it must be a coding problem.

If this car uses long coding then post the long code from the engine ecu.

nasir
29th February, 2012, 06:59 AM
hi friend that dtc will not clear in some skoda cars b,coz the engine ecu is fitted with abs function & your car dosen,t have abs so your ecu coulded found the abs in your car so it give fault code absent of abs but no problem with that your will will run fine without any problem

pasupathy
29th February, 2012, 07:32 AM
sir car is running good but check engine light glows & a/c is not working . when check engine light put off then a/c working good so please help me

rachmach
13th August, 2015, 06:17 PM
PLEASE i have the same problem can you help me