Peugeot partner immo bypass SID801A

[illestibor]

can help me somebody to bypass immo in SID801A, bcm was washed, replaced but is to complicated to adapt that used bcm wit ecu and key
5WS40155A-T
08114/244822563/04235
sw9653577680
hw9647423380

thanks advanced.

[paskizo]

Hi friend.

try this an report.

[illestibor]

thank you but how to cut the immo line?... here is only 2 line with CAN-bus comunication that is necesary, no?
Exist any other wires?Because the car don't start.
thanks

[barti122]

try this and report
no cut work tested solution

[illestibor]

Thanks, but the car still not start....:(
The immo located only in 93c56?What can i do if buy an used BCM?.
Can i use the used transponder chip to program it with BCM, and how to sincronise with ecm?Must be virginised the ecm?The car is from year 2004.
Thanks for help.

[barti122]

try write this flash ist virgin

[paskizo]

Thanks, but the car still not start....:(
The immo located only in 93c56?What can i do if buy an used BCM?.
Can i use the used transponder chip to program it with BCM, and how to sincronise with ecm?Must be virginised the ecm?The car is from year 2004.
Thanks for help.


Hi friend,if no work, i think you can dump the eprom in bcm and decrypt to stract the key, or rewrite with standard key, in this moment you can add keys to bcm.
Need ecu virgin state for this solution.

sorry for my english bro. ;)

[illestibor]

Hy friends.That car still not run.I have no time to occupe wit, but now it can made.
So. here is an changed bsi in a peugeot partner car.Because the used was wather inside, and damaged.
Now, i must virginize the ecu(sid801A), and syncronise with bsi, no?
But with the key?Can i use that used transporder from the key, or must change with a new.And can somebody tell me what the pin code for this bsi, from dump?

Thanks for help.

[barti122]

Pin Bsi MLLY
I understand how you want to change the others as BSI. You can copy content from one to the other BSI and will walk.

[illestibor]

This copy thing, from old in other used i tried, but with no success, i don't understand why.that was my first try.And now nothing.How to start that car?The gived Immo off solutions don't work with this type of ecu(SID 801 A)

[illestibor]

Can somebody give me the pin code from VIN number, for this car?

VF3GERHYB96109689

I try to repair the damaged BSI because with the used one cannot start the car.Thanks.

[barti122]

How can you send dump of this car. maybe to read pin


Overall, a little bit lost with the your car.
1 You can not remove Green from the engine controller
2 You usszkodzone BSI and is not working. right?
3 You can not clone the old to the new BSI because they dzai***322;a. right?
4 You tried to upload a virgin dump, and then program the new bsi?

I'm sorry but I do not know angileskiego., Translators "google translator" and often explains to me nonsense.


Your PIN from VIN PUDN

[illestibor]

Yes, my first try was to clone the BSI, but with no success, after that, the car don't start with the old one bsi to.Now i have 2 bsi, one with water damage, and another one with learning problems.I cannot learn to ecu and immo key.Give me pin code error, but pin was calculated from dump.
So i bored that car....:(

[barti122]

If you have inserted other bsi. you must have a new transponter to encode it. Old transponder does not encode any other pin.
Do you have a 100% working bsi. You can change it the same pin, with orginalego bsi. Then the car should start. but will not operate central locking
And what mistakes you show the planets.
The transmitter immo you fit?
podeslij charge of the smooth bsi and enter the pin how to change it. Change those and then check if it works

or try program this file prabobly ist virgin but not tested and try coding in planet

[illestibor]

thank's friends.Finally i resolved the problem.How i proceed?
First of all.Yes the content must be cloned,that meens you must change the eeprom 96150, or read it and write in othet bsi eeprom the content, but is not enough.you must have the old pin number from the damaged ,or malfunctioned BSI, and with planet, or other tool must be learned(adapt) the key back.After all, some configuration must be set and the car start.
the problem was for me that the old, damaged eeprom content doesn't store the right pin number,(probably was an other algoritm) i dont know why, but i get from VIN the correct one, what must be used after the cloning in the replaced BSI too.

Thanks for help.Wish for everybody an awesome day...:D

[med79]

hi,i need pin code from dump.tkx

[rokibar]

T6WN is your code

[med79]

Monday I will try thanks

[med79]

hi, the pin code is not god

[rokibar]

invert in NW6T

[stoyanov]

Try with pin code 6TNW.