PDA

View Full Version : BMW EDC17 Tprot10



VadimVG
29th February, 2012, 05:24 AM
Hello!
Who knows the solution for chip tuning bmw 530d f10?

Alpinesport
29th February, 2012, 08:02 AM
use edc17 boot only way

wiseman
29th February, 2012, 11:22 AM
Powergate does do BMW EDC17CP02 OBD without tp

powertdi
29th February, 2012, 11:57 AM
fgtech can do it . Boot mode only.

easytech
29th February, 2012, 08:06 PM
You have to remove the PCB from the case this is very very
Tricky

alfy
29th February, 2012, 08:18 PM
Powergate does do BMW EDC17CP02 OBD without tp

This is not the same ECU!!!

Morette
29th February, 2012, 09:30 PM
Boot mode, with the boot pin on the reverse.

The boot pin may also be found on the usual side, I have seen people mention something about this, but haven't seen it confirmed

VadimVG
1st March, 2012, 04:11 AM
EDC17CP45 Tprot10 unit can not be done even in boot mode. :afraid:

KESS and Optican do not make these ecu :(

powertdi
1st March, 2012, 06:31 PM
You not right. I told you Galeta can do it. And Quality clones also. /But not tested on it./

ecutuners
1st March, 2012, 06:41 PM
T-boot & x17 also support on latest 4.6g version,

BMW EDC17CP45 + CP46 TP8/10 boot loader only

filecloud
1st March, 2012, 07:54 PM
Hello
The question was about the edc17 from the new F models, not E models.
NO legal tool can do the F model edc17 at the moment. And shurely no clone!
greetings,
filecloud

powertdi
1st March, 2012, 09:49 PM
Filecloud I respect your opinion. And maybe you absolutely right, but why you so sure about clone tools? Do you test it?
I have original tools and clone also and I cant tell you for sure that is quality ( same like original) clone cant do it. I not have F version on my desk yet . But E is Ok. :top:

JMTec
2nd March, 2012, 01:19 AM
No one tool possible for the moment to tun the F series.
We use kessv2 with tricore, Ktag, new galletto, Byteshooter etc.

And over 5 client waiting :-)


Best regards

filecloud
2nd March, 2012, 09:24 AM
Filecloud I respect your opinion. And maybe you absolutely right, but why you so sure about clone tools? Do you test it?
I have original tools and clone also and I cant tell you for sure that is quality ( same like original) clone cant do it. I not have F version on my desk yet . But E is Ok. :top:

Hello
No, i do not test clones. But a clone is a clone. It cannot be better than its original tool. And if no legal BS, CMD, Galetto, Kess whatever can do them at the moment how could a clone do it?
greetings,
filecloud

panderetamix
2nd March, 2012, 10:34 AM
Hi.

This ECU is supported for K-TAG.

http://www.alientech-to.it/dox/KTag_Vehicles.pdf

powertdi
2nd March, 2012, 10:38 AM
Ok I agree with you . Clones cant be better. But for example few years ago we cant imagine to do edc16 OBD w/o original tool. Today we have reality , even 50$ clone tool can do this job propetly.
About F10 offcourse i f original cant clone also cant do it. As I wrote I not tested it.
What about Magpro X17?

dashboardkiller
2nd March, 2012, 08:59 PM
EDC17 TP10 tested with galletto and byteshooter.

galletto OK, no password requiered. with byteshooter you need the password and it can not read it.

really fine this galletto!

regards

filecloud
2nd March, 2012, 09:07 PM
EDC17 TP10 tested with galletto and byteshooter.

galletto OK, no password requiered. with byteshooter you need the password and it can not read it.

really fine this galletto!

regards

What Software/Hardware number was it and which BMW F model?

JMTec
3rd March, 2012, 09:50 AM
Hi.

This ECU is supported for K-TAG.

http://www.alientech-to.it/dox/KTag_Vehicles.pdf

If you read right you will see thats don?t supportet 3,0D on F series!!
We use the KTAG!

Morette
3rd March, 2012, 04:27 PM
EDC17 TP10 tested with galletto and byteshooter.

galletto OK, no password requiered. with byteshooter you need the password and it can not read it.

really fine this galletto!

regards

What is this password?

powertdi
3rd March, 2012, 04:41 PM
So , as Dashboardkilller said galeto can do this job. So that means clones will have a 90% succes to do this job.:top:

filecloud
3rd March, 2012, 04:57 PM
Why does dashboardkiller not post the ecu data and the file he has read? Before i do not see the file i do not believe it. This forum is full of false statements.
I have tested legal galletto on 530d 2012 model in bootmode. It does nothing. "Communication error".
:laugh: