PDA

View Full Version : need i\\o off fiat ullyce 2.0 95my



batpepi
3rd March, 2012, 09:40 AM
Need i,,o off fial ullyce 2.0 95my IAW 8p22
i try with i okiller and ecuvonux but it not work
here is hc11a1

stefaudio
3rd March, 2012, 10:07 AM
test dhis please

(praveno e s meuuci triabva da stane):top:

immokill
3rd March, 2012, 10:11 AM
Read MCU Motorola 68HC11A1
Write all FF except last line.

batpepi
3rd March, 2012, 02:54 PM
thanks,but not work
i try this before post here ,but unsuccessful

antlio
3rd March, 2012, 07:24 PM
Hi

Tested solution 100% . Pass is in your PM .

batpepi
3rd March, 2012, 08:01 PM
thanks,but not work too

antlio
4th March, 2012, 08:09 AM
Hi

This solution works 100% . I use it for all family 8P from Fiat and Peugeot-Citroen . There is main reley near the ecu . If doesnt work then the immo lamp in the dash always flash .When you swich on can you see if the mil lamp on ? This reley when you swith on starts and after 3 sec stop . Also can you hear the fuel pump ? If mil doesn t flash or fuel pump doesn t work then the problem is the main reley .

regards

benzerrouki
2nd June, 2015, 04:10 PM
THNAK S BRO

NEDD PASS PLS