FORD GALAXY 68HC11 E20 52 pin 1997

[newgeniehex]

HELLO
I must to change the mileage on this dash
i have a diga clone
i cannot find the connection in the diga pdf
can do via obd?
i have upa i don't have the connection for this mcu
i find
MC68HC11A8/E9 PLCC52 or
MC68HC11EA9 PLCC52
what is the good connection
many thank in advance

[newgeniehex]

HELLO
I must to change the mileage on this dash
i have a diga clone
i cannot find the connection in the diga pdf
can do via obd?
i have upa i don't have the connection for this mcu
i find
MC68HC11A8/E9 PLCC52 or
MC68HC11EA9 PLCC52
what is the good connection
many thank in advance


i put the picture of the dash

[bodzio012]

This dash you do by OBD, old tachopro do it too, I haven't diga but I think that diga should do it, You remember coding, but if you haven't any soft by o\OBD you connect such as hc11 focus, connecting point is the same

[diga1]

dont try vith diga it vill kill it

[fuktak]

diga1 is right.Diga kill dash.

[newgeniehex]

diga1 is right.Diga kill dash.
HELLO
I have alredy this picture by nyo4
i need connection upa can i read in circuit
I HAVE TRY TO RED IN CIRCUIT I CANNOT
I HAVE USE THE PIN 68HC11A8/A9 PLCC 52
many thank in advance
regard

[pnj]

Hello

I once had some trouble with this dash/mcu also.
Solution in my case was VAG Commander by OBD via K-line
Worked very well.
I always recomend orignal solution today via AVDI interface and K-kine function.

Good luck

Best Regards

[motorsport]

dont try vith diga it vill kill it
no kill this dash is same old sharan and alambra need save coding and report if you want your needles work

[newgeniehex]

no kill this dash is same old sharan and alambra need save coding and report if you want your needles work
HELLO
thank
i f i remove the mcu can i read whiout probleme whitout erase the dump
thank in advance

[newgeniehex]

Hello

I once had some trouble with this dash/mcu also.
Solution in my case was VAG Commander by OBD via K-line
Worked very well.
I always recomend orignal solution today via AVDI interface and K-kine function.

Good luck

Best Regards
HELLO
i fink my prolem is solved magic dash can can do it!!!
i will report

[bodzio012]

Magic dash do it 100%, I've done many times, but I think that diga should do it by OBD, after change only coding

[newgeniehex]

Magic dash do it 100%, I've done many times, but I think that diga should do it by OBD, after change only coding
hello
if i undestand i canot read the mileage i can write only!
it is ok?
regard

[pnj]

Hi

Yes this is correct as I remember it

[newgeniehex]

HELLO
i fink my prolem is solved magic dash can can do it!!!
i will report
work perfect via obd via kline whit magic dash can
the car start without dash this version don't have immo in the dash
regard:beer:

[Merzos]

thanks... this is what i'm looking for!! :-)