PDA

View Full Version : change ecu golf IV, need adapt


m3m5
7th March, 2012, 11:20 AM
I need change ecu golf IV. Ecu it's broke.
I can get pin code from dash but how can adapt with vag com?

thanks!!
jaelgti
7th March, 2012, 11:45 AM
read BDM and clone.
unu
7th March, 2012, 11:53 AM
I need change ecu golf IV. Ecu it's broke.
I can get pin code from dash but how can adapt with vag com?

thanks!!
procedure for swapping ecus is described very well into ross-tech site :
im#o-3 : Ross-Tech: VCDS: Immobilizer 3 ECU Swapping (http://www.ross-tech.com/vag-com/cars/Immo3-ecu-swapping.html#USED:)
im#o- 2 : Ross-Tech: VAG-COM: Immobilizer 2 ECU Swapping (http://www.ross-tech.com/vag-com/cars/immobilizer2.html)
jaelgti
7th March, 2012, 12:02 PM
If data UCE Medes, tea can help better.
m3m5
7th March, 2012, 02:35 PM
read BDM and clone.

oooohhhh !!!
good idea.
I have got bdm100 clone. How it's schematic for clone this ecu?? I haven't got pictures for bdm
macxlulu
7th March, 2012, 04:17 PM
bdm 100 edc15 ? or msa 15 ? big profesional

desolder immo -and set to immo off
m3m5
7th March, 2012, 04:17 PM
ecu broke is magneti 036906034CN Iaw4mv.gc

customer bring me 2 used ecus
036906034BB Iaw4lv.h
036906034DS Iaw4mv.ds

should work???

big profesional who? you??
jaelgti
7th March, 2012, 04:45 PM
This inside EPROM 27C512?

macxlulu that 8
lashkar97
7th March, 2012, 04:52 PM
easy tri with T300
ciptel07
5th February, 2013, 05:43 PM
SWOAP BOTH FLASH 29F400 AND EEPROM 95080
tomlib
6th February, 2013, 11:02 PM
Tried it?



Install the new ECU in the car
[Select]
[17 - Instruments]
[Adaptation - 10]
Leave channel at "00"
[Read]
[Save]

[Done, Go Back]
[Close Controller, Go Back - 06]
[Exit]

Turn ignition OFF for 15 seconds. Start vehicle.

But if you have other ECU number, can better re-solder flash and eeprom from old :)


Try and post result... :)