View Full Version : P206 edc16c34 dpf+egr

9th March, 2012, 09:25 AM
i trying remove Fap from p206 edc16c34 1.6L 80kw
with ecusafe , remove fap filter+catalist and insert simply pipe and blinded egr.
Now hawe problem measured turbo pressure value is high.
When going up the hill and jump over 5sec Safe Mode without lighted lights and no reported failures.
Just turn off the engine and started back.

check regulator of pressure and is OK, remove turbo check and clean but stil problem with turbo pressure value.

Mechanically is alright. If you write original back, or mod file without FAPoff so everything is alright.

Hey guys, could you help with this file?
Thanks Pablo :giveup:

9th March, 2012, 10:09 AM
ecusafe2 not work on this auto.
and you EGR off not correct
you need manually dpf off and correct your EGR off . i can help you

9th March, 2012, 11:53 PM
the exhaust gas flow has increased, allowing for more turbo spin, and more pressure, you should lower the turbo pressure map limiter. this way it wont go to limp mode

13th March, 2012, 01:06 PM
Thanks Magictuner.