View Full Version : Audi concert
szpic
9th March, 2012, 09:50 PM
Hello.
I need code for Audi concert.
Blaupunkt AUZ1Z3X5982569
Very thx.
Best regards
osman ?elebi
9th March, 2012, 10:20 PM
mc68hc dump here
serial no data base
lmsvvavr
12th December, 2012, 01:19 AM
Need code for Audi Concert...
MC68HC705C8A
fabi
12th December, 2012, 01:33 AM
Read MC68hc05b32 in plcc52.
lmsvvavr
12th December, 2012, 01:42 AM
Read MC68hc05b32 in plcc52.
Thank you for the reply...
http://www.digital-kaos.co.uk/forums/attachment.php?attachmentid=162118&stc=1&d=1355272898
Only have this two Motorola chips...
The above dump is from the 68hc705
madzar
12th December, 2012, 01:48 AM
your code is 3432
lmsvvavr
12th December, 2012, 01:50 AM
your code is 1034
Thank you...
I am going to solder the MCU back onto the radio straight away, will report in a couple minutes...
lmsvvavr
12th December, 2012, 02:16 AM
Thank you...
I am going to solder the MCU back onto the radio straight away, will report in a couple minutes...
Wrong code.... lol, just realized that you have changed it... know will have to wait an hour...:(
lmsvvavr
12th December, 2012, 03:17 AM
your code is 3432
Still wrong code... anyone?
radiodecoder23
12th December, 2012, 02:50 PM
see this picture
arık
12th December, 2012, 03:39 PM
see this picture
merhaba kaz***305;m ustam........................
lmsvvavr
12th December, 2012, 05:24 PM
merhaba kaz***305;m ustam........................
Don't understand your post...
I will read that one, but is not named mc68....
Is as I posted previous...
Does that chip has an "hidden" name?
arık
12th December, 2012, 05:42 PM
code is shown here in this
MCU 68HC705B32
lmsvvavr
12th December, 2012, 06:13 PM
Ok, I am with you now... thank you for the info!
Will read it tonight, and will post the results...
So much time wasted reading the wrong chip...:stupid:
lmsvvavr
13th December, 2012, 01:14 AM
Getting this problem...
If someone can help...
http://www.digital-kaos.co.uk/forums/f171/xprog-m-failure-288000/
lmsvvavr
13th December, 2012, 05:43 AM
FINALLY SORTED!!!!!!!!!!!!!!!
The whole problem was due to the use of the Xprog 5.3 (with dongle)...
Uninstalled and installed the 5.0, and viol?!:trytofly:
The dump was ok, and the code is 1834!
Just out of curiosity, I have attached the dump...
Thank you all for the help!
blerim shehi
14th December, 2012, 02:05 PM
FINALLY SORTED!!!!!!!!!!!!!!!
The whole problem was due to the use of the Xprog 5.3 (with dongle)...
Uninstalled and installed the 5.0, and viol?!:trytofly:
The dump was ok, and the code is 1834!
Just out of curiosity, I have attached the dump...
Thank you all for the help!
Cod is correct, but it is Code: 1834 Counter: 2.I have prepared for you RESET countr 0 please write this bin file that I will attach you now
lmsvvavr
14th December, 2012, 10:12 PM
Cod is correct, but it is Code: 1834 Counter: 2.I have prepared for you RESET countr 0 please write this bin file that I will attach you now
Too late know... the radio is back in the car...
But will keep the file, just in case!
sroka
12th January, 2013, 11:35 AM
hello please recode this radio thx
sroka
12th January, 2013, 11:36 AM
i read mc68hc05b32
audiopoint
12th January, 2013, 12:40 PM
-----0002---------
sroka
12th January, 2013, 03:10 PM
its not work
lmsvvavr
12th January, 2013, 04:36 PM
its not work
Read the MCU again, the code 0002 that "audiopoint" gave you is correct for that dump...
Maby dump is corrupted...
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.