citroen saxo 48p2.80 immo off or autocoding

[gadroulll]

i need the original file to immo off and not files from other ecu with different hw i have a lot of them .

ecu is 48p2.80 hw 9642774380 and sw 9644267980

if i make ff the adresses 4000-43a0
4800-4ba0 ,5000-53a0,5800-5ba0, 6000-63a0 i have a immo off file ,or autocoding file?

i need to fix checksums after making ff the above adresses?

[Joe019]

HI!

Here you got autocoding file.

Just put the file and make auto adaptative values into ECU with lexia3.

pass in pm.

[gadroulll]

this file is from meucci and as far as i know it will not work

[Joe019]

hi m8!

I have one saxo here with same Ecu and it works :)

BR

[Zmann]

none, as far as my long trials
-immo off not in those data blocks
-put all ff in the blocks PPS will not recognise the ECU
try to put the dump in 'word' (16bits) organisation you will see more!


i need the original file to immo off and not files from other ecu with different hw i have a lot of them .

ecu is 48p2.80 hw 9642774380 and sw 9644267980

if i make ff the adresses 4000-43a0
4800-4ba0 ,5000-53a0,5800-5ba0, 6000-63a0 i have a immo off file ,or autocoding file?

i need to fix checksums after making ff the above adresses?

[gkogkolos]

1. You have to desolder 29F400
2. Erase it with your programmer.
3. Flash the file I attach you.
4. Cut F3 & F4 Pins


You car will start like a charm, no problems with cooler fans etc.


No need to remove immobox.


Press reputation + 1 & thanks buttons = password


regards

[Helder Costa]

pass please

[Gatchet00]

pass please, thanks

[elektronik325]

pass please, thanks
Post Your ori file from car