PDA

View Full Version : Check Tuned File



TonyLow
12th March, 2012, 10:53 PM
Hi Chaps,
i have a what is a so called tuned file here from an EDC16C39 1.9 cdti 150 bhp Vauxhall Zafira but before i upload it to the ECU could the people with the knowledge please have a look at it and tell me if its ok to flash the ECU with it? Also any feed back on the Tuned state of the file would be appreciated.
Regards
Tonylow

mislav88
12th March, 2012, 10:55 PM
upload also original

TonyLow
12th March, 2012, 11:19 PM
Here is original
Regards
Tonylow

mislav88
12th March, 2012, 11:49 PM
:eek:

is this from ebay dvd?

alfy
12th March, 2012, 11:57 PM
Oh my...

If you love your car, don't use this mod file!!!

TonyLow
13th March, 2012, 12:02 AM
No its not from ebay.
Please explain whats wrong with it?

mislav88
13th March, 2012, 12:22 AM
who made this file?

lets start from the turbo map, luckily turbo limiter is not touched so that would save it. some other maps also very badly tuned.

bobolin4o
13th March, 2012, 07:24 AM
No its not from ebay.
Please explain whats wrong with it?
Everything is wrong...

mishu_b
13th March, 2012, 08:20 AM
...
does it your car?

find somebody to do profi job for it!

atb

del635
13th March, 2012, 12:59 PM
No its not from ebay.
Please explain whats wrong with it?
Iq limiters missed, smokemaps missed (but then again at 2.2bar turbo pressure lol) injector calibration messed with (big no no imo), turbo limiters missed, the turbo request map *holy ~~~~*. Increasing everything you find x% (30-40 in the case) does not mean x% more power. I really hope you didnt pay for it because its an absolute mess, without said limiters the turbo wouldve died instantly.

TonyLow
13th March, 2012, 03:44 PM
No not payed for it. Good thing i asked before i flashed my car with it?
Could anybody help me do a mild tune on it?
Regards
Tonylow

del635
13th March, 2012, 06:10 PM
Hi mate are you interested in doing it yourself? If so post what maps youve found and how you understand them and I'll help, theres a 170 version of this engine with same h/w, theres a good place to start research :)

TonyLow
13th March, 2012, 10:30 PM
Hi Yes will have ago myself here is the maps i have found so far using z452-387 driver with ecm21k
1C103E Fuel during acceleration 1/2
1C170A Fuel during acceleration 2/2
1C127C Fuel during acceleration 1/1(MAP 2)
1C2F78 Phase of injection 1C2F78 1/1
1CC8EE Torque limiter 1/1
1DCBFA Injection part throttle 1/1
1DFE72 Overboost 1/4
1E02F8 2/4
1E0582 3/4
1E07C6 Overboost 4/4
1E1BA0 Turbo pressure 1/1
1E2028 Turbo pressure f(temp) 1/1
1E224A Pressure limiter #1 1/1
1E7000 Rail pressure 1/2
1E74C8 Rail pressure 2/2
1E7862 Rail pressure limiter 1/1
1E7910 Rail pressure limiter 1/1
Thanks to everyone for there replies.

Stanton
13th March, 2012, 11:36 PM
Hi mate are you interested in doing it yourself? If so post what maps youve found and how you understand them and I'll help, theres a 170 version of this engine with same h/w, theres a good place to start research :)


Top tip, best advice for you to start learning yourself...

alfy
14th March, 2012, 09:32 AM
Top tip, best advice for you to start learning yourself...


Yes, but is not the easyes car to begin with learning...

So if you want a good remap for your car, buy a file from someone you trust... and than study

del635
14th March, 2012, 03:42 PM
I dont think theyre the hardest tbh, 8bit is more fun or even delco etc where theres not much info. I learned on old 8bit delco petrols years ago, I didnt even realise the wealth of info on american forums about them either lol then old diesels 8bit and mechanical, then edc15 with a few hints was alot easier to get my head around.
Its a tad expensive for parts for this car if anything goes wrong though so maybe not best that way.......

del635
15th March, 2012, 11:48 PM
Heres a map pack for win ols, it should have everything you need, now you must log your car with opcom to see whats going on, then dig out the alfa gt 170hp file from the net and see what the manufacturer done to increase power. Be careful and log log log read read read.

del635
15th March, 2012, 11:56 PM
Just re read this thread and noticed you said this is 150bhp, are you sure? The values look a bit low for 150bhp, did you read it through obd? Some tools miss the right map range.......I'll check a cdti 150 file Ive read and used tomorrow I'm on my home computer atm.....

TonyLow
16th March, 2012, 08:55 AM
Hi,
Yes it's 1.9 cdti 150 bhp.

del635
16th March, 2012, 09:29 AM
Could you get a read with bdm? Theres an excel file in there with a map list btw as well as the map pack, open the file with winols then go to import/export in the project menu, select map pack (.kp) and import my .kp file.

del635
16th March, 2012, 02:10 PM
10 people did NOT find that ^^ helpful :(

TonyLow
16th March, 2012, 06:47 PM
The only file i have was read with a original powergate master v2. My mate has a kess2 think that will do a full read.