bmw e39 530d ews - dde sync

[mafia666]

Hi. i have changed ews3+key from donor car. starter cranks, but i cannot sync dde with ews. Tried to use bmw scanner 1.4 - writes error, launch writes that dde and ews doesn't fit together. Tried out to read 0d46j with xprogm china clone, but not succeed (used ews adapter). Can I do something in dde unit to start the car?
bytheway, i cannot read isn number with impa from dde.

[bram380]

read ecu flash & ews,
post here both dump.

[mafia666]

thank you, i managed to run the car. i copied syncro data from old ews to new ews, which had a working key. managed to run my xprogm. thanks...

[maregiljr]

I have a problem with ews program.
I read ews and 95p08 eprom from dme and...
What I have to do to codifi ews with dme?
How I can know the code of one key?

[CHAMO]

hello
I have a problem with dde 4
it will not synchronize with ews 3

and that it be possible to meter
immo off or repaired in the flash or ews 3
thank you in advance for your help?

[CHAMO]

[QUOTE=CHAMO;1550900]hello

I have a problem with dde 4

it will not synchronize with ews 3

and that it be possible to meter

immo off or repaired in the flash or ews 3

thank you in advance for your help?

r if the flash can be no real estate on the M57 dde4

[Sir Pommes]

Here you are.
Write the files to the devices, enjoy and dont forget to thank.

regards

SP

[CHAMO]

salvation
thank you for the dump;
May it not work
the there are more then dump it with STARTER
??? I replaced the old file on the turns and not STARTER startup

[Sir Pommes]

Hello,

you have to write the new ews-file to your ews.
After that carry out a EWS assignement with INPA or something.
Then it should start.

regards

Jan

[CHAMO]

hello
I've done this as you said
error in the alignment gives dme
ews with the demarreu bizar and runs well the engine may not

[Sir Pommes]

Hi,


here we have a DDE so please read the eeprom not the flash.
My fault.

regards

SP