Fiat tool 1.4 china

[bodzio012]

Gentlemen!
I would like to ask if someone is using the equipment and how it works, is it worth buying or not really? Today the seller told me that it works well too for Opel CDTI program ECU, is this true?

[diga1]

i have it and it works great on punto and stilo, doblo ,but on opel i have never tryed yet

[bodzio012]

What models of Fiats could be done? Users can write this cable? Which he did and who did not?

[billykillkelly]

i did peugeot boxer 2008 to day works great but no fiorina not the doblo after 2010(

[drpeter]

i did peugeot boxer 2008 to day works great but no fiorina not the doblo after 2010(

It can even do a Maserati (older types).

[bodzio012]

Maybe somebody did ducato 2003-2007 year? I ask because I have often this car

[marcio1758]

is a good tool works great and does what it promises!

[bodzio012]

I heard that do it grande punto too, but need change pins OBD

[verica]

for me only do dash with eeproms with mcu didnt sucses to change km

[Apolo29]

is a good tool works great and does what it promises!

My friend, you tried with new Fiat Uno?

[marcio1758]

No! does not appear to me to test! you already tried?

[Apolo29]

No, next time i will do the car and then test with different car versions, to test.

[smokey08]

Has anyone tried this tool on an Iveco Daily?

[marcio1758]

I was searching the site and found this, someone has this working on the interface clone to share?
http://www.digital-kaos.co.uk/forums/attachments/f174/60068d1303752888-fiat-km-tool-1-4-fiatcan-v-2.3.rar

[yannick1800]

I did Ducato 2010 and Maserati Quattro Porte 2005 with this cable

[cfull]

My friend, you tried with new Fiat Uno?

not possible fiat uno novo
"novo fiat uno" is inside 24C16

[dfi]

is a good tool works great and does what it promises!

Can you share your version of software, I have v1.4, but without Stilo option. Thank you.

[honingkoning]

Has anyone tried this tool on an Iveco Daily?

I tried a daily 2008 not work for me.

B.T.W is it possible to update the cable a lot of cars are added.

Regards

[Apolo29]

Smok sells the original, and isn`t so expensive, maybe thats a good option

[marcio1758]

Can you share your version of software, I have v1.4, but without Stilo option. Thank you.

here it is! works great!

[bodzio012]

here it is! works great!


Marcio1758 where you bought your interface? I asked sellers/importers in my country told me that he has v1.5, 1.4, 1.1 and 1.0 but there are not stilo, one seller told me that ver 1.5 recognize version dash and stilo should be do it, but he isn't sure

[blackpirate]

Marcio1758 where you bought your interface? I asked sellers/importers in my country told me that he has v1.5, 1.4, 1.1 and 1.0 but there are not stilo, one seller told me that ver 1.5 recognize version dash and stilo should be do it, but he isn't sure

i think he its wrong! 1.4 its for fiat
and 1.5 for opel!!!

[marcio1758]

Marcio1758 where you bought your interface? I asked sellers/importers in my country told me that he has v1.5, 1.4, 1.1 and 1.0 but there are not stilo, one seller told me that ver 1.5 recognize version dash and stilo should be do it, but he isn't sure

Fiat is Km Tool no dongle! buy in china, works correct in style 912d60, I've done several, interface is very cheap and work ok!
http://www.ecutool.com/FIAT-KM-TOOL-V14_1777.html

[blackpirate]

Fiat is Km Tool no dongle! buy in china, works correct in style 912d60, I've done several, interface is very cheap and work ok!
http://www.ecutool.com/FIAT-KM-TOOL-V14_1777.html

expensive! that should be 18usd!!!
ecutool has high prices!!!!!!!!
buy from other suppliers!

[bodzio012]

I would buy fiat tool which do stilo, maybe somebody has any info or contact for tested interface

[pinkfloyd5eg]

hi to all, sorry if my question looks stupid, but I did run this software while plugging vag k+can v3.6 clone interface to the USB and both versions (1.4 and 2.3) responded to the cable, and cable indicator is flashing with soft read/write commands, does this means vag k+can interface can work with this fiat km tool software ??
(I didn't plug to any car, and will not get the chance to do, so please if possible someone try and report)

thanks in advance.

[paul_12345]

hi to all, sorry if my question looks stupid, but I did run this software while plugging vag k+can v3.6 clone interface to the USB and both versions (1.4 and 2.3) responded to the cable, and cable indicator is flashing with soft read/write commands, does this means vag k+can interface can work with this fiat km tool software ??
(I didn't plug to any car, and will not get the chance to do, so please if possible someone try and report)

thanks in advance.

No the cracked software will start with any FTDI chip device plugged in.

[yellowstilo]

Fiat is Km Tool no dongle! buy in china, works correct in style 912d60, I've done several, interface is very cheap and work ok!
http://www.ecutool.com/FIAT-KM-TOOL-V14_1777.html

i bought this tool and use it with the software of Marcio1758 - it writes ok to my Stilo cluster but does not read it....

reading: init...communication error!
writing: init...writing KM.....OK

has anyone experienced the same problem and is there a solution for it?
Because the writing works 100% i suspect this might be a software bug?
Any help appreciated !

[marcio1758]

i bought this tool and use it with the software of Marcio1758 - it writes ok to my Stilo cluster but does not read it....

reading: init...communication error!
writing: init...writing KM.....OK

has anyone experienced the same problem and is there a solution for it?
Because the writing works 100% i suspect this might be a software bug?
Any help appreciated !

frame where you marked the brand "Stilo" is necessary! I've done several Stilo all with success!
Please note, only makes 912d60 stilo! 912h128 is not able to make!

[yellowstilo]

hello, yes of course i marked the "Stilo" button - i think it is strange it works perfect for writing (no errors) but at writing it stops at 11% and says "communication error".
I managed to read about 3 mileages out of 100 attemps .
I tried setting port latency to 1 and tried different baud rates but this made no difference.
All instruments clusters i tried have the 912D60 inside.
any other ideas?

[verica]

here it is v1.5 soft with stilo

[yellowstilo]

Thanks but there is no Stilo button in this version - it seems it's just a renamed older version....

[bernalmotorsport]

Hola, yo tengo esta herramienta y funciona muy bien con los fiat que llegan aca a Chile, por lo menos en los que lo he probado, anda muy bien.

[yellowstilo]

Hola, yo tengo esta herramienta y funciona muy bien con los fiat que llegan aca a Chile, por lo menos en los que lo he probado, anda muy bien.

English please....

[vageric]

Hola, yo tengo esta herramienta y funciona muy bien con los fiat que llegan aca a Chile, por lo menos en los que lo he probado, anda muy bien.


ok translation in english!
halllo, i have recieved the interface here in chile, and it works really good with fiat cars. atleast with the cars that
i have tryed it on, it works real good!

[danielboom00]

hi m8

today i tested with stilo and works perfect!!i used the software v1.1, but i don?t know if with this tool i had changed the ecu also?

[ALEXEI]

hi m8

today i tested with stilo and works perfect!!i used the software v1.1, but i don?t know if with this tool i had changed the ecu also?

clone not work on ecus. buy original. you will be realy surprised

[bodzio012]

My 1.1 with stilo not work with grande punto by OBD and special connectiom for grande punto, other fiats did good, doblo, ducato after 2006y, punto 2001y, I have short time and My experience still small

[bodzio012]

Can I use a newer firmware ( 1,4 or 1.5)??? I have 1.1

[ALEXEI]

Can I use a newer firmware ( 1,4 or 1.5)??? I have 1.1

yes you can with no fear. interface not change firmware
in my opinion all sw are the same , only name is changed
original tool has released many updates since was cloned but on clone sw theres none reflected