PDA

View Full Version : LAND ROVER TD5



jaelgti
15th March, 2012, 12:00 PM
Hello gentlemen, immo off could be done in this ECU.

THANKS.

electrones
15th March, 2012, 01:04 PM
Hi friend, take a look here:

Rapid Remap Blaupause Remap Chip in a Box ? Rapid Remap ...
Rapid Remap Blaupause Remap Chip in a Box Rapid Remap Autocentre (http://www.carservicingcannock.co.uk/rapid-remap-bl).

When this chip is fitted, can the injection trim codes be adjusted?
The chip fitted at factory in the MSB type ecu is a ROM (EPROM) being READ ONLY MEMORY, the coding inside it cannot be adjusted once it has been wrote, it is also known as (OTP) One Time Program, meaning once it has been programmed, it cannot be erased or re-programmed. We supply the chip is an identical to this Replacement chip, we Chips Buy Blank as in them, and them Custom Program. The injection is Coding Trim Different are stored in the ECU chip on Circuit Board, it is 8-leg ares Small Serial EEPROM identified as a 93C46 MicroWire EEPROM. This is also where the ECU IMMOBILISER coding is stored. As this is not changed, the injection trim settings will not be effected .. It should be noted that once the new management software chip is installed, the trim settings stored for injection will need to re-trim to run with the new mapping. This process is known as optimizing, and can take a few miles to settle in, during which time the torque will appear to improve, idle and revving will become smoother, and cold starting should seem easier.

jaelgti
15th March, 2012, 01:14 PM
Thanks for answering, boy trying to understand what you say, and act accordingly.

electrones
17th March, 2012, 03:02 AM
Hi friend
Due to the calibration of the injectors. You can not touch the generic form immo off this ecu. you need to make a change in this file specifies "the 93c46/66".
but see autos sino Membro Jr. seem to have a solution for the td5.