Log in

View Full Version : MERCEDES C300 YEAR 2008 LOST KEYS


achaccha
16th March, 2012, 01:38 AM
Hello friends
writing to request your invaluable help, I have a vehicle in the workshop of 2008 Mercedes Benz model EQ3252GT7; This vehicle has lost all your keys and need to program a key to this vehicle, please I need your suggestions for a successful programming and tools I use.
attached to this image of EZS W204 290 778 07 S which belongs to this vehicle
regards
mercis
16th March, 2012, 06:45 AM
go to mb dealer,order new key
achaccha
11th April, 2012, 03:41 AM
Friends.
My client has requested the key to the Mercedes dealership.
the dealer states that the key import takes 20 days.
today marks 20 days and I'm sure tomorrow will be delivered to my client.
my question is, the key is ready to start the vehicle?
or you have to do some configuration in the same vehicle?
thanks for your comments
antibisic
11th April, 2012, 11:35 AM
Need to be programed with the car
kool_mi
11th April, 2012, 12:50 PM
NO NEED PROGRAMED
JUST PUT KEY IN EZS FOR 30 SECOND
ALL IS OKKKKKKKKKKKK
antibisic
11th April, 2012, 02:07 PM
NO NEED PROGRAMED
JUST PUT KEY IN EZS FOR 30 SECOND
ALL IS OKKKKKKKKKKKK

Maybe you right I had changed ezs and should be programed but key probable not,sorry my fault
achaccha
11th April, 2012, 03:43 PM
Hello Friends
I have the key in my hands, press the buttons on the key, they open and close the doors, put the key in the EZS and the key will not turn, it is consulting the dealer, they want the vehicle to be driven to mercedes dealer workshop.
that could be happening?
regards
antibisic
11th April, 2012, 06:03 PM
Hello Friends
I have the key in my hands, press the buttons on the key, they open and close the doors, put the key in the EZS and the key will not turn, it is consulting the dealer, they want the vehicle to be driven to mercedes dealer workshop.
that could be happening?
regards

Try to leave ignition on for a while
achaccha
21st April, 2012, 01:02 AM
dear friends.
I have good news to share, today I went to Mercedes C300 vehicle, carrying the councils of each of you. I found that indeed the key not turning in the EZS, then procedures as follows:
put the key in the EZS 5 seconds and then remove.
wait 5 seconds and replace the key in the EZS for 5 seconds more and remove the key.
wait 5 seconds and then replace the key to EZS for 5 seconds more and so on.
perform this procedure approximately 15 times, then repeat the procedure, you hear a sound in the steering wheel. turn the key and turned on the dashboard and started the engine
thanks friends for their valuable comments

:goodpost: