View Full Version : Help installing frimware on Max V
maccervoy
17th January, 2009, 07:13 PM
Hi, ive looked on the site for help on installing my autosort firmware to my Max V but cant find what i need.
Basically ive dl the firmware but when i plug my usb cable to the box it says i need to dl driver software for usb serial driver.
Can anyone please shed some light..
thanks very much
Devilfish
17th January, 2009, 07:22 PM
There are drivers posted here...
http://www.digital-kaos.co.uk/forums/f10/please-upload-maplin-usb-serial-rs232-drivers-d-12622/?highlight=drivers
Also make sure your PC has it set to com1.
http://www.digital-kaos.co.uk/forums/f34/how-change-com-port-settings-using-usb-serial-adapter-1926/
And there's a guide here for flashing the eurovox.
http://www.digital-kaos.co.uk/forums/f71/guide-how-flash-eurovox-9790/
maccervoy
17th January, 2009, 07:36 PM
Just tried looking for the com ports in device manager, but the only thing i find in there is standard serial over bluetooth link!.. nothing about a prolific usb to serial bridge....
Am i just being an idiot or will i need to download something extra?
thanks for yout time
neal
Devilfish
17th January, 2009, 07:39 PM
You will need to install the PC drivers before it will recognise it.
maccervoy
17th January, 2009, 07:56 PM
Ive downladed the drivers for prolific and also have the firmware update dl to my desktop, when i open the firmware a box opens with.........
DOWNLOAD
channel update Browse
UPLOAD DOWNLOAD EDIT
what is it i need to do here, i have tried pressing the top download button, and also upload, but nothing happens... just a box appears with COM 3 in....
sorry for being a newbie, but im not too hot on this stuff
thanks again
maccervoy
17th January, 2009, 07:58 PM
sorry that last thread should have read "channel data".... not channel update
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.