View Full Version : ECU pin code for opel
efekhs
17th March, 2012, 03:20 PM
Hi All
Any one help me pin code or Virgen dump for this ECU
ViN: W0L0TGF4826099768
DEL 011535128909353509 D
DRTJ
D01001
Z16SE
P0201A09b
Thanks for advance
gyapi11
17th March, 2012, 03:46 PM
Hi All
Any one help me pin code or Virgen dump for this ECU
ViN: W0L0TGF4826099768
DEL 011535128909353509 D
DRTJ
D01001
Z16SE
P0201A09b
Thanks for advance
Hi:OPCOM read pin code
efekhs
17th March, 2012, 04:15 PM
i do that but code not appear by opcom
vanos batam
17th March, 2012, 04:15 PM
read tms immo
Shmortz
17th March, 2012, 04:33 PM
on corsa/combo C is possible to read pin from instrument with op-com or simular, otherwise read tms in immo box and post dump
efekhs
17th March, 2012, 04:36 PM
ok ill try that
gyapi11
17th March, 2012, 05:38 PM
i do that but code not appear by opcom
Opcom 090420 read Z16XE astra g .. Watch carefully the video
https://rapidshare.com/files/3685806057/OP-COMDE.ZIP
work :Z14-16 XE-SE
guplaiz
12th April, 2012, 06:11 PM
Maybe a dump file without immo in Car Dumps Database.
You program it directly by obdII connector with a
galetto1260 or equivalent and it's ok.
VictorBazan
12th April, 2012, 10:30 PM
Read at the ECU 25C320 and post dump, regards
DimaP
16th April, 2012, 06:02 PM
I also tried to read carpass from hsfi 2.1 with Opcom 090420. On the z16xe its read, but on the z16se can not read and get the following picture. Also I can not be read or written the dump to z16se ECU using kwp2000. Has anyone solved this problem?I heard that somebody write dump to z16se with galletto, but how to get karpass through opcom?
gyapi11
16th April, 2012, 07:48 PM
I also tried to read carpass from hsfi 2.1 with Opcom 090420. On the z16xe its read, but on the z16se can not read and get the following picture. Also I can not be read or written the dump to z16se ECU using kwp2000. Has anyone solved this problem?I heard that somebody write dump to z16se with galletto, but how to get karpass through opcom?
HI.Motor selection is always z16xe.So you tried?
DimaP
17th April, 2012, 05:11 AM
HI.Motor selection is always z16xe.So you tried?
Yes of course. This option is available only under z16xe menu and 2003 MY.
TrzyEr
17th April, 2012, 07:51 AM
Hi ! somebody can help me with get pin to ecu(it is used from other car ) This is dump from new ecu by Galletto 1260 car is Combo C with Y17DTL engine ecu is TX2
116667
knok
17th April, 2012, 07:57 AM
Hi ! somebody can help me with get pin to ecu(it is used from other car ) This is dump from new ecu by Galletto 1260 car is Combo C with Y17DTL engine ecu is TX2
116667
pin code isn't stored into ecu's flash ... is stored into eeprom memory 95320 and this one cannot be read with tuning tools
TrzyEr
17th April, 2012, 09:53 AM
I try to read 25320 but its only FF what i can do wrong ? its any solution to read this in circout ?
knok
18th April, 2012, 07:17 AM
I try to read 25320 but its only FF what i can do wrong ? its any solution to read this in circout ?
you can read in circuit with upa , seeprog , xprog e.g. but if your programmer can't supply 5v for eeprom then you must feed with external source
georgegt
19th April, 2012, 12:23 AM
:puke:
25 320 on HSFI 2.1
interesting where can you find it
there in HSFI 2.1 I can't find it
Posible 25 320 in Y17DT ecu but in HSFI I don't see it
maibe post a picture with and lead
I have 2 ecu withowt immo and rest of it I will try on it
But far as I know eeprom is integrated in procesor and cant be readed
knok
19th April, 2012, 05:54 AM
:puke:
25 320 on HSFI 2.1
interesting where can you find it
there in HSFI 2.1 I can't find it
Posible 25 320 in Y17DT ecu but in HSFI I don't see it
maibe post a picture with and lead
I have 2 ecu withowt immo and rest of it I will try on it
But far as I know eeprom is integrated in procesor and cant be readed
25320 isn't onto HSFI2.1 or 2.5 . only on Y17DT or variants.
Read post #13
neriuks007
19th April, 2012, 06:46 AM
better is desolder eeprom,it is safe,i always desoldering
ankara06
19th April, 2012, 08:14 AM
better is desolder eeprom,it is safe,i always desoldering
all is good solutions :)
gyapi11
20th April, 2012, 08:52 AM
Yes of course. This option is available only under z16xe menu and 2003 MY.
HI.I just read and it works z16se
DimaP
27th April, 2012, 07:20 AM
HI.I just read and it works z16se
But in my case it did not work. Your key is the standard algorithm KEY= 0xFFFF(SEED XOR 0xFFFF) -0x82E9. In my case it does not work, and a strange seed from my ECU (0x3412 is the inverted 0x1234). I'll go over all the software keys. This should take about a week. (65536*10) sec. I made a program that write a key to OP-Com window, click button, and read answer automaticaly.
DimaP
28th April, 2012, 09:53 AM
My key is 0x7D16
hmc
2nd May, 2012, 06:47 AM
all is good solutions :)
always the best way .demount chip & read or desolder for the lack of better word .good luck:goodpost:
fluorescent
1st October, 2012, 06:52 PM
always the best way .demount chip & read or desolder for the lack of better word .good luck:goodpost:
How to desolder a eeprom in a hybrid ecu?
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.