Ssangyong Kyron Chip 93CS56

[cotymoto]

hi guys and tried to read memory Ssangyong Kyron 93cs56 with superprog and I can not read. I can say that and tried to read and not 93cs56 93C56, you can read? . someone can help out, thanks

[claudio35]

Read in circuit only?

[cotymoto]

Read in circuit an desolderig and not read nothing. Only FF FF

[vageric]

put dash back in car and see what happens.

[claudio35]

yes, put the dashboard back in the car, to verify that the dump is not damaged.

[cotymoto]

and it appears the same place and miles, everything works fine. dont understand. i read with 2 programmer and read equal. FF FF IN ALL LINES.

[captain crackers]

It would seem the chip has a fault. I had this recently but in my case, I could read and write the chip but only the original miles would work in the car. I think you will need a new chip and dump, or replace the chip and walk away from the job. Arthur.

[rtbdiagnostic]

hi guys and tried to read memory Ssangyong Kyron 93cs56 with superprog and I can not read. I can say that and tried to read and not 93cs56 93C56, you can read? . someone can help out, thanks
had same issue with digiprog these 93CS56 chip whether incircuit or desoldered read only FF FF FF on a 93C56 selection ... make sure you select 93CS56 eeprom type then it reads 100%