PDA

View Full Version : Mpps v5 problem with edc16 c9



obnchip
19th March, 2012, 09:14 PM
I try today to write opel zafira 1.9cdti 120hp edc16 c9 with mpps v5 but its not write it give error.(ecu not erased).Before i done edc16 c9 astra and vectra with no problem.The file was readed but winols shows cheksum problem in readed original file.I got an right original file and that wanted to write.What can be the problem?

the readed file

mexanico1971
19th March, 2012, 09:17 PM
maybe you got to do it in ecu circuit ! bdm clone do that

obnchip
19th March, 2012, 09:30 PM
I try today to write opel zafira 1.9cdti 120hp edc16 c9 with mpps v5 but its not write it give error.(ecu not erased).Before i done edc16 c9 astra and vectra with no problem.The file was readed but winols shows cheksum problem in readed original file.I got an right original file and that wanted to write.What can be the problem?

the right original file

pablo1971
20th March, 2012, 09:36 PM
i no the v3 mpps had issues with 1.9cdti...is the cable deff v5 or a v3....

ominimicu
21st March, 2012, 12:03 AM
dont try, it will erase it, mpps clone sucks at opel cdti vehicles. It does not geta full read, and it has writting problems. BDM is safer

obnchip
21st March, 2012, 07:41 AM
what about with galletto on table?

mishu_b
21st March, 2012, 08:10 AM
dont try, it will erase it, mpps clone sucks at opel cdti vehicles. It does not geta full read, and it has writting problems. BDM is safer


my friend let me do not agree with you.

MPPS tool has a lot of issues - but for EDC16 it is the best solution.

I'm talking from experience not from theory.

obnchip
21st March, 2012, 08:33 AM
i dont understand i have done astra and vectra edc16 c9 with no problem but this zafira cant write and the read was not right.and the read was only the last block if compare the read and an same original file...

ominimicu
21st March, 2012, 06:34 PM
it reads bad, not full, and and i had problems with mpps it didnt wrote neither. It s your risk.