vw DSG mileage reset

[antibisic]

Anyone checked mileage in the dsg after reset is it cleared good or only half job?I tryed with several tools but it works same and always I see old km inside because it clear only on one place but another not and all tools after reset see 0 km,but if you check with good diagnostic it see old km?Thanks

[markony79]

Which tool you use for this?

[antibisic]

Digiprog and smok

[Ding-Dong]

what about Enigma ?
can it reset the mileage in DSG ?

[antibisic]

yes all can reset but how its question

[TULGEYWOODMAN]

what about Enigma ?
can it reset the mileage in DSG ?

and dp3.......................

[CARPARTS]

all can reset the dsg, but old mileage still in some channels.
scan all measurements blocks with VCDS, old km is still inside, even after a reset with DP-3.

it only will put 1 block on 0 km, all other contain the old original value.

[newgeniehex]

Anyone checked mileage in the dsg after reset is it cleared good or only half job?I tryed with several tools but it works same and always I see old km inside because it clear only on one place but another not and all tools after reset see 0 km,but if you check with good diagnostic it see old km?Thanks
HELLO
i dont have this tool for change the mileage
i think you can change the mileage on the dsg
after you must to clear the historic
it is same for edc 16 after you are change the mileage on the edc 16 you must to clear the history because the mileage is stored too
regard

[Maartinj]

Download dump from there and try to edit.

[antibisic]

HELLO
i dont have this tool for change the mileage
i think you can change the mileage on the dsg
after you must to clear the historic
it is same for edc 16 after you are change the mileage on the edc 16 you must to clear the history because the mileage is stored too
regard

No my friend it,s not the same it is not historic problem

For Maartinj which memory I think its hard to do

Problem is that all mashine producer even from 10000-15000 euro claims that can do this and nothing,big shit

[bkenigma]

Strange as Ive actually scanned all the measuring blocks and have only seen the new dsg mileage, well whatever it is up to after it is reset. Can you tell me which channel shows the original km please.

bkenigma

[antibisic]

You can check chanel 110

[bkenigma]

You can check chanel 110

Thanks AntiBisec. I'm gonna check in the AM and report back

bkenigma

[TULGEYWOODMAN]

Thanks AntiBisec. I'm gonna check in the AM and report back

bkenigma
I will also check this.

[bkenigma]

Hmmmm.. Channel 109 shows 0km. However what I did find interesting is channel 108 I believe. It shows a KM value, and not what the current DSG value is. Whats intersting is and I read this somewhere which made me think of trying it. You take that number and multiply it by 8, that is the exact amount of miles that the dsg module actually has, aka real odo value, lol.

bkenigma

[TULGEYWOODMAN]

No my friend it,s not the same it is not historic problem

For Maartinj which memory I think its hard to do

Problem is that all mashine producer even from 10000-15000 euro claims that can do this and nothing,big shit

but in your post no.3. you say 2 machines can do it

[cokolo]

You can check chanel 110

Yesterday I reset DSG mileage in Audi A3 2007 with AVDI and after reset I read with AVDI and mileage are 0km , but in channel 100 store old BIG value :bawling:.
My luck that I got this function free (gratis) :top:and not paid .
THANKS Antibisic

[cokolo]

but in your post no.3. you say 2 machines can do it

I think that function reseting km in DSG module AVDI have first .:wink:

[antibisic]

but in your post no.3. you say 2 machines can do it

Yes this producer claims that can reset but it exist more versions dsg one is with only one chanel and that works good but with 2 chanels only erase one