PDA

View Full Version : HELP FIAT STILO 1.9 JTD BOSCH



ernesto1670
26th March, 2012, 04:22 PM
Hi dk `s
I need your help.
I have a Fiat Stilo 1.9 JTD
ECU BOSCH 0281011553
5P08C3
I need to remove the immo.
Someone can help me with a solution.



thanks

giuba74
26th March, 2012, 04:54 PM
se vuoi scodificare totale devi farlo sulla flash

ernesto1670
26th March, 2012, 05:08 PM
se vuoi scodificare totale devi farlo sulla flash

attached reading 29F400

Thanks

giuba74
26th March, 2012, 11:11 PM
eccoti il file
devi fare il cks

lupu_sandu
27th March, 2012, 07:23 AM
Your file off (pass in PM):

ernesto1670
28th March, 2012, 04:35 PM
eccoti il file
devi fare il cks

Hello mate
Try it with your file, the car will not start.
Thank you very much anyway.

ernesto1670
28th March, 2012, 04:36 PM
Your file off (pass in PM):

Hello Lupu
Your file works fine.
Thank you very much.

med79
1st December, 2012, 10:52 AM
Hello lupu,this is original file.

lupu_sandu
1st December, 2012, 11:36 AM
Your file off (pass in PM):

IwanNIS
8th July, 2013, 08:25 PM
Hi Mr. Lupu, can You please help on this? It's Stilo 1,9 JTD. BSI is defective. I found another bsi and tried to virginise it, with hc912dg128, but no joy. Can't read old bsi motorola properly, every read is different. Can do it off in ecu? Here is file from 29f400.

BR,
Ivan

gyapi11
10th July, 2013, 06:08 AM
Hi . TRY IT .

IwanNIS
12th July, 2013, 04:26 PM
Thank you gyapi11, the file works perfect!!!

Alex_G
19th August, 2013, 10:11 AM
Hello,

Can someone please help me with Fiat Stilo 2001 immo off (29f400).

Thanks!
Alex_G

gyapi11
19th August, 2013, 11:59 AM
Hi.read it again. File's not good

Alex_G
19th August, 2013, 12:16 PM
I desolder flash and read it with LabTool,... Shall i put flash back and read again with galleto ?

OK, readed again,.. i hope this will be good.

Thank you,
Alex_G214738

gyapi11
19th August, 2013, 05:50 PM
Hi. TRY IT

Alex_G
19th August, 2013, 08:59 PM
Thank you will post result tomorrow after test.

Just one question, as i can't test untill tomorrow morning.

For my ECU is ok to make IMMO OFF in flash or would be better to make IMMO OFF in eeprom ?

i'm not sure if i wrote exact ECU model: BOSCH 0 281 010 337. Inside i flash 29F400 and eeprom 5P08.

Regards,
Alex_G

Alex_G
20th August, 2013, 05:29 PM
Hello gyapi11 (http://www.digital-kaos.co.uk/forums/members/268568-gyapi11/),

Thanks for help, file work! Car start, there is just some LEDs on for IMMO and engine. Also servo Steering Wheel don't work, but i don't think this is related to IMMO OFF.

In car BSI was changed, could this have something with Steering Wheel?

Thank you,
Alex_G

Alex_G
21st August, 2013, 12:01 PM
eeprom from ecu

16eddi67
31st August, 2013, 05:10 PM
Hello,

Can someone please help me with Fiat Stilo 2003 immo off (29f400).217056

ssemmedo
12th September, 2013, 01:58 AM
i have the same problem. i need immo off for this file but with checksum calculated.
Thnaks in advance

electrones
19th September, 2013, 10:22 PM
i have the same problem. i need immo off for this file but with checksum calculated.
Thnaks in advance

Hi friend
Put a picture of the ecu, which appears all numbers "HW / Sw" okk
The bin is the original?
Cheers

dimet
11th October, 2013, 12:15 PM
Please immo off FIAT STILO 1.9 JTD BOSCH flash 29f400



224083

dimet
11th October, 2013, 06:56 PM
Your file off (pass in PM):

Can you send me code from file "fiat stilo 2003 1.9 ecu bosch 0281011553_off.rar (http://www.digital-kaos.co.uk/forums/attachments/f178/159688d1354358196-help-fiat-stilo-1-9-jtd-bosch-fiat-stilo-2003-1.9-ecu-bosch-0281011553_off.rar)" sended to "med79".

Thanks

gyapi11
11th October, 2013, 07:44 PM
Hi. Try it. pass

dimet
15th October, 2013, 04:28 PM
Sorry but dump is not good.

Ocin
15th October, 2013, 09:07 PM
try this224828

kohli
8th June, 2015, 03:28 PM
MR luppo pleas pass
thanks

lupu_sandu
8th June, 2015, 03:56 PM
Post your original file.