Merceded W204 c-classe 2011 AVDI help pls

[dave11674]

hi guys
just had a W204 in 2011 c-classe

only had my software a few days too lol for the AVDI.

i connected up to do some initial testing.

went into w204 option clicked get on the dash & EZS = got the right mileage cool i thought
went into assyst and clicked get at top and it showed me mileage and days - cool i thought
went into battery sensor into actual values showed me mileage - cool i thought

so i opened then tut up for the W221 as we don't have for W204 so was just following the basics

it told me to go into the CGW and read and save the eeprom and flash
so i did, selected W204 from drop down and clicked read eeprom

2 seconds later "failed to read eeprom, switch off then on and try again"
hmmm
so cycled ign and tried again
same error !!!!!
so tried to read flash
same error
good start to new software lol

any1 had this before and rectified it ??

guy with motor came mileage to have it done also.

does any1 have a tut for doing this W204 model ?
what bits to do in what order or does that not matter ?

i went into read/write eeprom and read the instrument cluster no problems at all so its deffo working
just the CGW not playing ball lol


dave

[DNG2010]

For the 204, don't need to save anything, it saves automatically.

Do Following...
1.) Do Service
2.) Do Odometer
3.) Do Battery Sensor
4.) Clear DTC

If you have STAR, do TPM as well... AVDI Doesn't support this yet...

You are done...

[vageric]

how to clear TPM with star?

[DNG2010]

how to clear TPM with star?

Haven't tested personally, but go it from here...

you can with star developer
"ansteuerungen" shadowmemory erase

http://www.digital-kaos.co.uk/forums/f174/mercedes-tyre-pressure-monitor-248644/index2.html

[dave11674]

thanks guys
i have updated 5.6 mercedes and it supports TPM
are you saying it supports but cannot do lol ?

also how long does it take to do the dash and ezs ??
as i was told about 40 mins and am i right jump leads to my running car so the battery dont go flat ?

thanks

dave

[DNG2010]

thanks guys
i have updated 5.6 mercedes and it supports TPM
are you saying it supports but cannot do lol ?

also how long does it take to do the dash and ezs ??
as i was told about 40 mins and am i right jump leads to my running car so the battery dont go flat ?

thanks

dave

It takes 5-10 min for me... and 5.6 is battery sensor no TPM.

TPM for 204/212 is not supported. Its supported for 221 164, 216, etc...

[dave11674]

ahhh okies i just saw TPM and thougth it would of bin for them all
i dont think its on this car
as i never saw it in the list

dave

[cokolo]

DONT FORGET !!! :wink:
EVERY TIME WHEN YOU WORK NEW MERCEDES WITH AVDI ALWAYS PUT LAP-TOP ON AC NO MATTER WHAT YOU BATTERY FULL OR WHAT HOLDS BATTERY:ciao:

[dave11674]

too right, lots of people stressed this to me heheh
i had extension cable cumin from a work hut to power the lappy, i was gunna do it thru the ciggy lighter but thought nahh ~~~~ that lol

dave

[dave11674]

can is done now
thanks guys and esp tugly for over the blowa help ;)

much apreciated.

the clocks and ezs took about 1 min to do i was like WOW

dave