Info for TPX1 TPX2 TPX3

[Belloriccoefamoso]

hallo
sorry for my ignorance
can someone explain me what are TPX1..2...3...
1) which are differences from other transponders?
2) which car use them?
3) how program new transponder?

thank you in advance

[didi_du_93000]

TPX is a type of transponder of JMA manufacture.
It's clonable transponder. With TPX1 TPX2 TPX3 and now TPX4 (new model replace the old TPX3) you can clone all transponder.

TPX1 is for Texas fixed transponder (many toyota, MITSUBISHI, mazda, ford...)

TPX2 is for TEXAS CRYPTO (many toyota, MITSUBISHI, mazda, ford and some PEUGEOT CITROEN and renault)

TPX3 and TPX4 is for all Philips CRYPTO II.

See attachment.

[Belloriccoefamoso]

so TPX1 is like T5
TPX2...3...and 4 is like last MH2 of silca?

[joubliss]

TPX1 for copying 4C

TPX2 for copying 4D

TPX3/4 for copying PCF7936 (id46)

[Belloriccoefamoso]

so like in silca!

[claudio35]

If I buy cn900 eg, I can copy:


CN1 chip, Copy 4C Chip or TPX1
CN2 chip Copy 4D Chip or tpx2

CN3 chip Copy ID 46 or TPX3/4

Copy 48 Chip?


Be so?

[jamesnz888]

If I buy cn900 eg, I can copy:


CN1 chip, Copy 4C Chip or TPX1
CN2 chip Copy 4D Chip or tpx2

CN3 chip Copy ID 46 or TPX3/4

Copy 48 Chip?


Be so?


You have to buy CN900 to be able to use CN1, CN2. CN1 and CN2 are NOT compatible with TPX1, TPX2 and TPX3 at all.

CN900 is NOT able to copy ID46 at this stage even the vendors say it is the pipeline.

NO one on earth can COPY ID48 at this stage, posibly NOT in the furture either because of it's strength of encryption.

PLease d NOT mix TPX1/2/3 with CN1/2/3, they are totally different products.

[digitaltech]

TPX is a type of transponder of JMA manufacture.
It's clonable transponder. With TPX1 TPX2 TPX3 and now TPX4 (new model replace the old TPX3) you can clone all transponder.

TPX1 is for Texas fixed transponder (many toyota, MITSUBISHI, mazda, ford...)

TPX2 is for TEXAS CRYPTO (many toyota, MITSUBISHI, mazda, ford and some PEUGEOT CITROEN and renault)

TPX3 and TPX4 is for all Philips CRYPTO II.

See attachment.

There should be an option for double/triple/quadruple thanks...

[claudio35]

Ok, but the page says this: WWW.CN900.NET | Cn900 programmer,CN2 Copy 4D Chip,CN1 Copy 4c Chip (http://www.cn900.net/pro/)

[didi_du_93000]

It's a funking china tool!!!!
When you buy a CAS3 by OBD tool in china it's write:
"You can Make a key on all CAS2 CAS3 and CAS3+"
But you can't do it!!!


When you buy a ORV it's write:
"You can do a key on all Renault Opel and Volvo cars"
But you can't do it!!


China Tool is like a lottery.
If you would like to do a good work and without problem...

BUY ORIGINAL.

I lose many money in china tool.

[jamesnz888]

Ok, but the page says this: WWW.CN900.NET | Cn900 programmer,CN2 Copy 4D Chip,CN1 Copy 4c Chip (http://www.cn900.net/pro/)

Again, no one on earth can copy ID48 yet, also CN900 still can NOT copy ID46, it is their pipeline but not now.

I am 100% sure of it because I know who makes it and we talk to each other on regular basis.

[claudio35]

didi_du_93000, this tool is original, one which is manufactured by Chinese and is upgradable.

[didi_du_93000]

No it' not make by a eginering office but by a clonner office.
It's a mix of all original tools.

Original is:

JMA TRS 5000 + TPH + TPX
MIRACLONE
SILCA RW4
ZED BULL
....

[claudio35]

If you say that is a copy of which is a clone, if even the transponder chip is manufactured by them.

The Chinese also make original tools, such as USA PROG

[Bishop c4]

If you say that is a copy of which is a clone, if even the transponder chip is manufactured by them.

The Chinese also make original tools, such as USA PROG

hey claudio you start your thread...... asking, then.......... you direct atention to a web page...........now you are making strong affirmations.
seems like you are:
a) chinese seller
b) so naive
c) or very stubborn.

because you recieve a clear explanation and you insist in your statements.

Regards

[Fallen]

Word on the street is ID48 has been cracked and will be available by the end of the year.

The streets talk a lot though ;)

[jamesnz888]

Word on the street is ID48 has been cracked and will be available by the end of the year.

The streets talk a lot though ;)

That will be wonderful news for locksmiths all over the world, it will also depend on the price of the gear too, I would not afford if it costs me a arm and leg.

preferably it is an add-on for TRS-5000 or RW4 Plus or 884.

[claudio35]

hey claudio you start your thread...... asking, then.......... you direct atention to a web page...........now you are making strong affirmations.
seems like you are:
a) chinese seller
b) so naive
c) or very stubborn.

because you recieve a clear explanation and you insist in your statements.

Regards
I talk to my supplier and recommended me, I just repeated what she reported. Have not I buy

[Bishop c4]

I talk to my supplier and recommended me, I just repeated what she reported. Have not I buy

as I see you have two options trust in your supplier or in our friends here in DK; its up to you.

Best wishes in your choosing

Regards

[Atex31]

I looked at tools from all over the world including China, there are so many untrue claims and blatant lies saying it will do this and you can update it on the original manufacturers software or it will be added soon!
When I finished my search, I spent ?2000 on a genuine Zed-Bull from a UK supplier with updates and full support.

You can buy cheap tools for some jobs, but when it comes to transponders buy original!

[digitaltech]

If you say that is a copy of which is a clone, if even the transponder chip is manufactured by them.

The Chinese also make original tools, such as USA PROG
isn't usa prog ripoff jprog ?

[Bllinda]

When you buy a ORV it's write:
"You can do a key on all Renault Opel and Volvo cars"
But you can't do it!!


China Tool is like a lottery.
If you would like to do a good work and without problem...

BUY ORIGINAL.

I lose many money in china tool.

I read about the device-ORV4-1 a Chinese production. And it was written in the Volvo keys do not work.

Chinese trader is dishonest and, later on they write. You all know. And avoid my mistake.

[marginal]

Are ALL the Chinese TPX1, 2, 3 & 4 good, or should I look elsewhere?
I remember I read somewhere, there are bad TPX2 or TPX3 transponders coming from China, but I can't find that topic any more.

Regards.

[Automat]

I've seen them for sale at Apollo-auto, bought sample of TPX1 to see if they will work.

[marginal]

I've seen them for sale at Apollo-auto, bought sample of TPX1 to see if they will work.
Please, keep us informed ...

Thanks.

[waylyn]

I looked at tools from all over the world including China, there are so many untrue claims and blatant lies saying it will do this and you can update it on the original manufacturers software or it will be added soon!
When I finished my search, I spent ?2000 on a genuine Zed-Bull from a UK supplier with updates and full support.

You can buy cheap tools for some jobs, but when it comes to transponders buy original!


Have you got a link for genuine Zed-Bull I would like to buy one.

[totalkey]

Have you got a link for genuine Zed-Bull I would like to buy one.

i sale my zed bull if you want pm please

[Automat]

Got TPX1 to work on clone zed bull, but can't get it to write twice. Anyone know if Chinese TPX1 can only be written once??

[sparkz02]

I got TXP2 from apollo auto used with ad900 worked fine.

[lashkar97]

Got TPX1 to work on clone zed bull, but can't get it to write twice. Anyone know if Chinese TPX1 can only be written once??
do u share price of tpx1 from china with us :bounce:

[totalkey]

Got TPX1 to work on clone zed bull, but can't get it to write twice. Anyone know if Chinese TPX1 can only be written once??
is reusable

[lidons]

I've seen them for sale at Apollo-auto, bought sample of TPX1 to see if they will work.


the original Tpx1, if reusable, I have no experience with the Chinese.

attempts to reset the tarnsponder, to re-record, that if it is possible ff ff ff ff ff

says if you have been able to rewrite

[rodrigonicolas]

TPX1, TPX2, Chinese, work fine with TMPro2, AD900 pro, Apollo-Auto.com, checked!!!

[jamesnz888]

I have used about 200 of CN1 / CN2 for 4C and 4D cloning on CN900, and 30 of Cn3 for 46 cloning. they are so good and so nice to use. do NOT get me wrong I still own my TRS5000 genuine although I hardly use it. I can use these Chinese chips (CN1, CN2 and CN3) to clone 4c , 4D , 46 and insert them into remote key shell, why bother programming if you can clone, safer and no hassle. the price for these Chinese chips are much cheaper than TPX1,2,3,4. on average they are about 5~8 use dollars.

[p1et]

So that chinese chips (TPX1, 2, 4) works with another genuine clone machines? What about MiraClone? There is a difference in price so would be nice.

[hbfj]

There are differences between plastic and glass housing TPX3 chips ? A see the plastic is cheaper.. I would like to buy some for ID46 cloning - with Zedbull.

[godfathertre]

you cant compare cn900 with trs 5000 or trs 5000 evo different class of machine and good software upgrade from jma real company .

[MV auto]

can you use, AVDI or zed-bull clone etc. with those CN3 transponder? or only with CN900?

[p1et]

can you use, AVDI or zed-bull clone etc. with those CN3 transponder? or only with CN900?

Don't know about avdi or zed but you can use on TRS 5000 and miraclone.

[didi_du_93000]

Also work on tmpro2

With tapatalk