Lancia Y 2005

[Belloriccoefamoso]

Hallo
tomorrow will arrive a customer with a Lancia Y of 2005
and the key have a transponder ID48 with the new key SIP22 (silca)
can someone help me in which procedure to duplicate the key?
i have zed bull clone.
I have to desold eeprom and add key as usual?
which eeprom is? where is? the immo box is back fuse box as in Fiat?
thank you

[topclef]

BSI = Magneti Marelli .
Immo in MCU Motorola MC68HC912DG128 or MC9S12DG256 .
Add Key is Same Procedure as Fiat .
Read / Write MCU in Circuit .

[Belloriccoefamoso]

thank you
what is BSI?

do u know if the eeprom is 93LC66 or the really little 95160? in 2005 i think could be 93LC66... right?

[dj_piex]

i belloriccofamoso, i am from italy..

if you do the id48, you do precode the key, read the mcu 9s12 into the body,( fusibiliera in basso a sinistra) and insert the full read of e2p intro the zedbull to precoded the key..
at the last you just active new key whit sbb, or sdd or zedbull...

[Belloriccoefamoso]

(scusa mo non ho capito la procedura che mi hai descritto)

can someone just tell me:
1) which eeprom is in Lancia Y of 2005
2) i follow same procedure like in Fiat with eeprom 93C66?

[verica]

No there is no eprom in this car there is mcu hc912 need upa or etl programmer to read this mcu :listen:

[Belloriccoefamoso]

i have upa programmer
infact i use it to program 93C66!
whch is difference? can someone explain me well?
i no need "half" explanazion
i need understand well
thank you

[Belloriccoefamoso]

hallo
with zedbull clone and upa usb programmer i had add a second key to the lancia y but it doesn't work
here dump old and after add key
can someone help me in understand what is wrong?

[Belloriccoefamoso]

inside there is an mcu mc9s12dg256 cvp

[topclef]

Use attached dump , write it back and start your car , otherwise you can use this pin-code 23526 , using same transponder and learn it with SBB or Tcode ....

Good luck

[Belloriccoefamoso]

can i know what i had wrong? which was my mistake?
the pin code i had extracted too...

[Belloriccoefamoso]

for me is important know where i failed because i want learn,
as i told you i have clone of zed bull not original and with 5.08 version inside...maybe it wrong? but it had calculate well pin code so where i wrong? :(
thank you

i had compared the 2 bin files and they are different in 3 row with value 82 instead 83.....

[topclef]

Did you test my dump , car start or not ?

Problem in your Zed-Bull , add key but not authorized .

[Belloriccoefamoso]

topclev thank you a lot, it work!!!!!!!
but...now i need know what i wrong to not repeat mistake!!!

[Belloriccoefamoso]

so the problem could be in zed bull clone?


Did you test my dump , car start or not ?

Problem in your Zed-Bull , add key but not authorized .