OPEL VECTRA B NEED CHANGE MILEAGE, PLEASE

[fluorescent]

Hi all, somebody can change me mileage of this dump 93c46 opel vectra b to 189780km i try with Liznick but no succes,is change the dump and give me error PR09.
I have xprog-m i hope that i make everething corect.
Or if somebody give a corect dump of this dashboard i realy be happy, thanks.
115027

EDIT: that memory not work with my dash, i find this one that works fine but have 98000 i think,not important but comes in miles,need km, there is a posibilities to make it 189780 but km?
I realy apreciated your help.

[d.zio]

old km????????

[maciupiciu]

which are original km value 329400km?

[d.zio]

if old kms 389..... try this

[maciupiciu]

try this dump

[fluorescent]

Sorry this one that i find in this forum seems to works with my dash, the others give me error PR09 but this one comes in miles.Somebody can change it in 189780 but km?Big thanks everybody.


115035

[captain crackers]

Convert kms required to miles. Change to this figure, replace the dash, switch the ignition on and hold the trip button in until the display changes to kms. Arthur.

[z786]

TU does this obd

[fluorescent]

I make it with original dump and calculate with tachosoft but you have to swap byte, example:... if you have FE CD you put CD FE on the first line 00x0 where is the mileage stored and that?s it.
I make it with xprog-m on the board, but sometimes gives you acknowledge error, ignor it you have to insist on the xprog-m write button up to 100% and you have your memory writed.Thanks everybody.

[captain crackers]

These cars are up to 16 years old. I first did one clip to chip in 1996. It is more difficult to remove the cluster and open it than it is to program it. I used a ?50 eeprom programmer, no fancy tools in those days. 10 seconds to read, 1 minute to edit, 10 seconds to program. No tachosoft to calculate only brain and windows calculator. Since about 1997 it has been done OBD in 30 seconds. You have been all day. Has it been worth it? Arthur.

[HAMIZA]

SEND ME THE DUMP OF THIS I ME SEND THE DUMP:ciao:

[HAMIZA]

THIS SIT FOR CALCULATEUR OPEL /
http://www.trds-co.com/Files/Opel.rar

[fluorescent]

These cars are up to 16 years old. I first did one clip to chip in 1996. It is more difficult to remove the cluster and open it than it is to program it. I used a ?50 eeprom programmer, no fancy tools in those days. 10 seconds to read, 1 minute to edit, 10 seconds to program. No tachosoft to calculate only brain and windows calculator. Since about 1997 it has been done OBD in 30 seconds. You have been all day. Has it been worth it? Arthur.

I only asking for help, i dont need to know your life story, and yes is worth it, i dont let the things until they are done.
Not all the people are smart like you, i wonder why you dont win a Nobel price.
I?m not wining money doing this, like you, i only help a friend to pass the revision and he buy a junkyard dash but with much more km that his car.
Sorry for my english he toke me all day to write this message,as you see.

[captain crackers]

flourescent, firstly your English is fine. I admire your work ethic, (keep going until the job is done). I am sorry if it appeared that I was trying to be clever. This was more for other people to read as most on here would do this job by OBD. As to whether it was worth it, well financially it wouldn't be but for experience, now you know how to do it the long way, yes it was worth it. Once again, I am sorry if I caused you any offence. Arthur.

[fluorescent]

You are forgived...jejeje

[Noetzel]

thanks lot

[racin-snake]

op com can do the mileage adjust on this car vectra B