PDA

View Full Version : Need simple advice please



z786
7th April, 2012, 04:44 PM
Hi, im thinking of buying tactrix openport 2.0

i need to know what software will cover all the mazda diesel range

and also i need to knw whats the cheapest

1 more thing also if any1 knows what will read toyota denso


thanks

Bruce Willis
7th April, 2012, 05:32 PM
Hi, im thinking of buying tactrix openport 2.0

i need to know what software will cover all the mazda diesel range

and also i need to knw whats the cheapest

1 more thing also if any1 knows what will read toyota denso


thanks

Mazda diesel with waht ECU? If Denso - than MMCFLASH or may be Mazdaedit by obd. Or some thing like Piasini by AUD(jtag, BDM).
Denso Mazda have SH7058 CPU

pablo1971
7th April, 2012, 07:37 PM
if i am right,you need the openport 2,and then the mmc is a add on,that works with the openport/tactrix obd cable.......basically openport 2/tactrix cable does the evo and impreza.then you can add to it......

z786
7th April, 2012, 08:44 PM
Mazda diesel with waht ECU? If Denso - than MMCFLASH or may be Mazdaedit by obd. Or some thing like Piasini by AUD(jtag, BDM).
Denso Mazda have SH7058 CPU

if i bought the mmc flash, wud i buy the mazda sh7058 module and do all mazda denso diesels or only a certain range?


also

has some1 got a list of ecus of the mazda range in diesel?

mazda 3
mazda 5
mazda 6

etc

z786
8th April, 2012, 12:26 PM
*** bump ***

pablo1971
8th April, 2012, 12:30 PM
MMCFlash Mitsubishi Mazda Yamaha ECU Flashing (http://www.evoscan.com/mmcflash-mitsubishi-mazda-yamaha-ecu-reflashing)

ECU Reprogramming (http://www.evoscan.com/free-ecu-rom-downloads)


try these mate.....you should find all the info u want

Bruce Willis
8th April, 2012, 11:02 PM
Mazda Denso module still on testing
I have one ECU from Mazda 6 Diesel Manual - 05-07
I think there is no difference in the programming of ECU, and read them all the same, even though petrol, though diesel.
If you have an ECU that you want to test, then you can send it to me. If the method of programming is different, then we'll add you to the support of the ECU for free. This applies to any ECU of Ford and Mazda.

Bruce Willis
8th April, 2012, 11:18 PM
if i am right,you need the openport 2,and then the mmc is a add on,that works with the openport/tactrix obd cable.......basically openport 2/tactrix cable does the evo and impreza.then you can add to it......
Open Port use as the adapter J2534. MMCflash is a stand alone software with usb key.

pablo1971
8th April, 2012, 11:27 PM
thanks for putting me straight bruce...

z786
8th April, 2012, 11:33 PM
same for mazda 5? wat about mazda from 2008--->

Bruce Willis
9th April, 2012, 01:08 AM
I dont have info what type of ECU there.