PDA

View Full Version : Volvo xc90 2007 D5 185cv



bugarcek
8th April, 2012, 10:06 AM
Hello which tool may I use to read my volvo xc90 d5 185 cv.

I tried with galleto and mpps, but nothing I can not read it.

VRPerformance
8th April, 2012, 12:19 PM
You cant Read VOLVO from OBD,you need to connect K-line directly to the pin of the ecu

bugarcek
8th April, 2012, 05:21 PM
Thank you for answer.

Can you also tell me which pin is this?

regards

Alpinesport
8th April, 2012, 06:04 PM
it is 43 ind small connector

bugarcek
9th April, 2012, 03:21 PM
http://shrani.si/t/2y/4r/2Wkv2AKA/prenos.jpg (http://shrani.si/?2y/4r/2Wkv2AKA/prenos.jpg)

I added k line cable and conected, but mmps does not read it.

Where should be the problem now?

VRPerformance
9th April, 2012, 03:40 PM
you have to not disconnect the plug from the ecu,just add cable to this pin from the back side of the plug,also im not sure about your MPPS becouse i use other tools

pablo1971
9th April, 2012, 03:55 PM
what i have done in the past is to put a small loop on a long piece of wire,put the loop around the k line terminal on the mpps cable(obd).....plug the mpps onto the car....now remove the back from the ecu connector and place the wire in the correct terminal..

bugarcek
9th April, 2012, 05:03 PM
I had read it!
Thank you for all instructions, you are the best!

adam12112
19th April, 2012, 07:04 PM
I had read it!
Thank you for all instructions, you are the best!
What tool you use galletto or mpps?
I have galletto and i try read XC90 2008 D5 185HP, i can ECU detect everything ok but i can not read ECU i have error reading parametr set.