Dash Opel Corsa D 2008

[Igor1973]

Hello All!
Please help me with calculation mileage in dash Johnson Control from Corsa D.
Mileage in my original dump is - 196420 km. I need - 96120 km
I am know mileage locations in dump but can not right calculate value in 0x20 - 0x3F. :(

Also ask to calculate same value (96120km) for ECU Magnetti Marelli From engine Z13DTJ. I see three areas in the dump where the mileage is recorded. I understand the algo for the first area but not know how calculate value from second and third...
All dumps are attached here. Thanks advance.

[borysgo2]

igor
Your dump is few bytes too long.
There you go 96k

[Igor1973]

Hm.. Really dump is 4 bytes long... And it is not correct... Thank you for your note.
I am now reread dump - it is same only without four FF in end...

borysgo2 (http://www.digital-kaos.co.uk/forums/members/179096-borysgo2/),
wich tool do you calculate? Licznik?

[cotymoto]

Hello All!
Please help me with calculation mileage in dash Johnson Control from Corsa D.
Mileage in my original dump is - 196420 km. I need - 96120 km
I am know mileage locations in dump but can not right calculate value in 0x20 -0x3F. :(

Also ask to calculate same value (95 120) for ECU Magnetti Marelli From engine Z13DTJ. I see three areas in the dump where the mileage is recorded. I understand the algo for the first area but not know how calculate value from second and third...
All dumps are attached here. Thanks advance.


here you dum dash full ok

[Igor1973]

Thank you, cotymoto! (http://www.digital-kaos.co.uk/forums/members/53686-cotymoto/)
But i this case I am not sure about values in 0x20 - 0x3F too.

[borysgo2]

here you dum dash full ok

Are you sure what you doing ?

[Igor1973]

:) Men is a joker. I see it. but for me the important value in line 0x00, 0x20, 0x30. I want to understand the algorithm.

[cotymoto]

Thank you, cotymoto! (http://www.digital-kaos.co.uk/forums/members/53686-cotymoto/)
But i this case I am not sure about values in 0x20 - 0x3F too.




see attentive picture, you km and new

[rapkopat]

try and report but this file working.

[Igor1973]

Thank you. Yes, it working.

To All: Can anybody calculate mileage in ECM for this car? Dump attached in first my message. Or better post in this topic:
http://www.digital-kaos.co.uk/forums/f174/opel-corsa-d-2008-z13dtj-mileage-ecm-265989/#post1522731

[Igor1973]

see attentive picture, you km and new

Yes, I saw this. But NYO shows the same mileage for different values in the addresses 0x20 - 0x3F but in some cases in the dash - --------