Log in

View Full Version : komatsu dashboard



luiggii79
14th April, 2012, 08:26 PM
i need help komatsu odometer for change engine hour.
this dump contain 6132 hour.
i need 20 hour ,

pbn
14th April, 2012, 08:44 PM
hi
try this and 'please' report!

luiggii79
14th April, 2012, 09:06 PM
hi
try this and 'please' report!
your file is small 390kb

pbn
14th April, 2012, 09:17 PM
hi
my file its same size as yours!
if you unzip boath files they are both 390kb.

pbn
14th April, 2012, 09:23 PM
please send file again

luiggii79
15th April, 2012, 05:54 PM
please send file again
i was write in 16bit wrong dump .but this is the 8bit dump
thanks

pbn
15th April, 2012, 08:01 PM
hi
try this.
its the 16bit file that you send me first.
good luck!

luiggii79
15th April, 2012, 08:11 PM
hi
try this.
its the 16bit file that you send me first.
good luck!
it, same hour
i was change line 7c0 and 7e0 to ff , apair 0000 hour
for adreses E1 2E 75 29 F6 55 97 4E exist hour meter somebody help me calculate 0020hour

luiggii79
17th April, 2012, 04:55 PM
anyone help for me?

knok
18th April, 2012, 08:35 AM
anyone help for me?
after your modifications you have 0 hours ... if you let go for a few hours can you read back dump to see what was changed there ?

luiggii79
20th April, 2012, 09:04 AM
after your modifications you have 0 hours ... if you let go for a few hours can you read back dump to see what was changed there ?

i left work engine 1 hour after modification , and does not the change the display
i will do it that back the original dump , and work again ninim 1 hour and rereading dump

knok
20th April, 2012, 10:12 AM
i left work engine 1 hour after modification , and does not the change the display
i will do it that back the original dump , and work again ninim 1 hour and rereading dump
ok , will wait for new dumps

luiggii79
5th May, 2012, 02:20 PM
ok , will wait for new dumps

this is a new dump after exactly 1 hour

Meat-Head
5th May, 2012, 02:35 PM
sorry, unable to assist, but rumor has it, that if the engine is at idle 1 hour is 1 hour
if the engine is just above idle then 1 hour is displayed as 1 1/4 hours.

unable to assist further.

Meat

luiggii79
5th May, 2012, 03:38 PM
sorry, unable to assist, but rumor has it, that if the engine is at idle 1 hour is 1 hour
if the engine is just above idle then 1 hour is displayed as 1 1/4 hours.

unable to assist further.

Meat

i don't know,this my engine work at idle

luiggii79
5th May, 2012, 03:43 PM
this is a new dump ,after engine run 43 minutes again change odometer .please help calculate 20 hour

395112801
6th May, 2012, 08:42 PM
this is a new dump ,after engine run 43 minutes again change odometer .please help calculate 20 hour
About 18-20 hours, I calculate not precisely,


The programmer writes to set up 16 bit (can not use 8 bit to write)

luiggii79
7th May, 2012, 01:23 AM
About 18-20 hours, I calculate not precisely,


The programmer writes to set up 16 bit (can not use 8 bit to write)
not work is a same hour:(

395112801
7th May, 2012, 06:52 AM
not work is a same hour:(
You tried to show that (( ( Note : the file can not use the the 8bit programming mode )) )

knok
7th May, 2012, 07:41 AM
not work is a same hour:(
try this and let me know result

luiggii79
7th May, 2012, 02:24 PM
thanks your dump ,but don't work . it is locate the counter

Meat-Head
7th May, 2012, 11:25 PM
OK, can you fill that part of the dump with FF - then see if it's zero and let the thick bloke use it for another 20 hours.

Can you get another hourmeter to take a dump off.

can you attatch photos of hour meter anyway?

Meat

luiggii79
12th June, 2012, 06:24 PM
OK, can you fill that part of the dump with FF - then see if it's zero and let the thick bloke use it for another 20 hours.

Can you get another hourmeter to take a dump off.

can you attatch photos of hour meter anyway?

Meat

don't work
please help someone help me please

Meat-Head
12th June, 2012, 09:24 PM
ask member captain crettin
.
he thinks he is the best on here
.
no idea

luiggii79
27th June, 2012, 11:37 AM
thanks for all ,i am solved

Meat-Head
27th June, 2012, 01:20 PM
good perhaps you could explain to help out the next DK member

TULGEYWOODMAN
27th June, 2012, 03:52 PM
ask member captain crettin
.
he thinks he is the best on here
.
no idea

MODERATORS PLEASE NOTE


YET ANOTHER OFF TOPIC POST,
INTENDED TO PROVOKE .......PATHETIC!


ps. I think he knows a little more than you!

chrismoore02
27th June, 2012, 04:16 PM
This is like being back at school. Come on guys sort it out :banghead::beer::)

Sent from my Galaxy Nexus using Tapatalk 2

TULGEYWOODMAN
27th June, 2012, 04:26 PM
This is like being back at school. Come on guys sort it out :banghead::beer::)

Sent from my Galaxy Nexus using Tapatalk 2

Well you obviously didnt see the post meathead put on, making an insult about Arthurs[captain crackers] 14 yr old daughter.

Why would any normal person do that?

[the post was removed and meathead is now refusing to accept what he did was out of order, not by DK rules, but by the rules of common decency]

Before anyone responds to his defence................Why should this important issue be brushed under the table?

Would any normal member on this forum insult someones daughter or other family member? No, of course not!

An apology........thats all it takes.

Thats why I responded.

chrismoore02
27th June, 2012, 04:37 PM
Tbh I have not seen the forementioned posts nor do I really want to get involved as I find this forum a good source of info and help. Its just there is a pop on every thread I read. All I'm saying is sort it out guys, if meat head has done wrong he should just apologise and then we can draw a line under this whole thing and theses useless off topic pops at each other.

Sent from my Galaxy Nexus using Tapatalk 2

Meat-Head
27th June, 2012, 07:10 PM
All i'm saying is if any member spots a bad post then press the report botton.

do we have the solution to the orginal problem you can share please.

Also handy if your own computer goes down!

Not going to mention the fact somebody accsed me of lying then lied themselves - (if i got that right), end of, zip no more arguing. Theres a WHOLE moderator team waiting with a LORRY load of grey paint, i don't want a drop, so now ignoring any off topic banter from now.

We have ALL been warned by TWO different moderators, in think 4? threads, so count me out - but not grey yet. :giveup::giveup:

Meat.

TULGEYWOODMAN
27th June, 2012, 08:11 PM
All i'm saying is if any member spots a bad post then press the report botton.

do we have the solution to the orginal problem you can share please.

Also handy if your own computer goes down!

Not going to mention the fact somebody accsed me of lying then lied themselves - (if i got that right), end of, zip no more arguing. Theres a WHOLE moderator team waiting with a LORRY load of grey paint, i don't want a drop, so now ignoring any off topic banter from now.

We have ALL been warned by TWO different moderators, in think 4? threads, so count me out - but not grey yet. :giveup::giveup:

Meat.

You still havent got the decency to apologise to Arthurs Daughter?

diagtech
27th June, 2012, 09:31 PM
Have you got a picture of cluster need to sort one out myself

Meat-Head
27th June, 2012, 11:36 PM
You still havent got the decency to apologise to Arthurs Daughter?


OFF TOPIC:-

Right, have been off-line tonight, but intended on doing tonight, when back on-line, but now you have shoved your nose in, Mr C and his 3/4 is going to have to wait till next week now, thanks to you.

TULGEYWOODMAN
28th June, 2012, 08:13 AM
What model komatsu is it?
I have access to loads of these.



off topic

meat-head, When are back off holiday?

TULGEYWOODMAN
28th June, 2012, 07:17 PM
OFF TOPIC:-

Right, have been off-line tonight, but intended on doing tonight, when back on-line, but now you have shoved your nose in, Mr C and his 3/4 is going to have to wait till next week now, thanks to you.



So whats tonights excuse to avoid apologising for an insulting remark you made to Arthurs daughter?



it wont go away, dont think it will.