PDA

View Full Version : fap-off nissan qashqai



dj_piex
17th April, 2012, 03:39 PM
i have only a question, i have to remove a filter dpf from this nissan qashqai, probably edc16.

i have decided to read and write only to my bdm to have zero problems...

now, not sure to the correct procedure to remove the filter...

i have to reset all error in ecu, read ecu, work file and write ecu, try the car, if no error, i put in garage to remove the filter...

now my question is: it's good my technic or is bad?

i have to remove filter or only drill whit 4 holes ?

anyone have doing this car correctly?

thx for response to my question... ;)

ecutuners
17th April, 2012, 04:27 PM
If you use ecu safe you will be removing the ecu again in future to use proper Dpf off so get it done manually and you can forget about this car

dj_piex
17th April, 2012, 04:41 PM
i have other program, not ecusafe ;)

powertdi
18th April, 2012, 06:19 AM
Best choice in this case original dumps w/o fap with same horse power. But need to do injectors coding.

dj_piex
18th April, 2012, 07:09 AM
I have see the ecu, is a sid 305, not possible to read and write whit my cable.... :(

Metki
20th April, 2012, 02:33 PM
what ecu in this car?

dj_piex
20th April, 2012, 02:40 PM
Sid305 siemens

levisdj
20th April, 2012, 11:30 PM
KESS v2 does that ECU