PDA

View Full Version : VOLVO S80 2007 PROBLEM CHANGE KM.....HELP PLEASE



aposig
18th April, 2012, 10:34 AM
Looking for calc km to BCU volvo s80 2007.i make a bin for ecm and not work, when i start car it jumps back to original value,oane freend make me thise bin with enigma .........and not work ..,whu have any ideea with help ?
original km is 200627 km, and at enigma do 133200 km ,i need 133200km thanks ?

Ramzai
18th April, 2012, 03:16 PM
Looking for calc km to BCU volvo s80 2007.i make a bin for ecm and not work, when i start car it jumps back to original value,oane freend make me thise bin with enigma .........and not work ..,whu have any ideea with help ?
original km is 200627 km, and at enigma do 133200 km ,i need 133200km thanks ?

In Enigma it is counted correctly.

aposig
18th April, 2012, 03:37 PM
nobady can help me ???

aposig
18th April, 2012, 03:40 PM
BUT NOT WORK !!!!!!!!I MAKE DASH AND ECM ,AND PUT IN CAR ....AND ALL OK ...BUT AFTER START CAR COME BACK ....THREE TIMES MAKE THISE.....

drpeter
18th April, 2012, 05:03 PM
BUT NOT WORK !!!!!!!!I MAKE DASH AND ECM ,AND PUT IN CAR ....AND ALL OK ...BUT AFTER START CAR COME BACK ....THREE TIMES MAKE THISE.....

I think enigma's dump is not ok, try this, sorry guys pass protected.

Ramzai
18th April, 2012, 06:29 PM
I think enigma's dump is not ok, try this, sorry guys pass protected.

Peter, you isn't right!! :)

drpeter
18th April, 2012, 06:36 PM
Peter, you isn't right!! :)


pass = 54321 :-)

PremierD
18th April, 2012, 06:41 PM
lol lol lol

Ramzai
18th April, 2012, 06:44 PM
pass = 54321 :-)
It is seen your calculator considers incorrectly... :)

P.s. At S80 and XC70 often it is necessary to consider and other blocks... and differently mileage all the same comes back...

drpeter
18th April, 2012, 06:48 PM
It is seen your calculator considers incorrectly... :)

I see your dump doesn't recognise this algortihm, that's why it doesn't work. We will see tomorrow when my dump is tested.

:-)

z786
18th April, 2012, 07:20 PM
fight fight fight

ALEXEI
18th April, 2012, 07:26 PM
the problem isnt the bcm dump correction.
there is also fuse procedure.
km are in all modules on this car.

drpeter
18th April, 2012, 07:28 PM
the problem isnt the bcm dump correction.
there is also fuse procedure.
km are in all modules on this car.


Is possible but I saw a difference between enigma and my calculation and I tested my calculation on the same car S80 2007. Now I can do this car by OBD.

marcio1758
18th April, 2012, 07:49 PM
BUT NOT WORK !!!!!!!!I MAKE DASH AND ECM ,AND PUT IN CAR ....AND ALL OK ...BUT AFTER START CAR COME BACK ....THREE TIMES MAKE THISE.....

DASHCODER also clear guidance on the (DTC)

marcio1758
18th April, 2012, 07:55 PM
here it is!

binken
18th April, 2012, 09:55 PM
DASHCODER also clear guidance on the Dynamic Traction Control (DTC)

DTC is not Dynamic traction control
DTC is Diagnostic trouble code

Dynamic traction control is built in brake controll module BCM (ABS) and has no km inside in this car

DTC clear , means that you should deleting DTC codes , some DTC may contain km, therefore important to erase the DTC diagnostic trouble codes

aposig
19th April, 2012, 12:34 PM
NOT WORK DEA DRPETER ,I THINK THE KM IN TWO LINE ....WHU HAVE A BIN WITH THIMLAR ECM BUT KM ONLY 50000KM.....130000....KM PLEASE PUT THISE ,THANKS !!

proaudio
19th April, 2012, 01:56 PM
NOT WORK DEA DRPETER ,I THINK THE KM IN TWO LINE ....WHU HAVE A BIN WITH THIMLAR ECM BUT KM ONLY 50000KM.....130000....KM PLEASE PUT THISE ,THANKS !!



BEFORE REQUESTING DUMPS EXPLAIN STEP BY STEP ALL YOUR PROCEDURE!!!!!!
In Steps:
1. I remove battery terminal
2. Then I remove IC and BCM
3. Then I change mileage in IC and BCM..
4.
5..
6....
7.....
N. Mileage jumped back

aposig
19th April, 2012, 02:29 PM
1.I REMOVE BATERRY
2.REMOVE DASH AND BCM
3 change mileage in IC and BCM.
4 PUT BACK DASH AND BCM
5 CONECT BATERYY
6.OPEN DOR
7 SEE AT DASH 133200 KM
8 PUT KEY IN CASY ,AND START CAR ....THREE SECONDS AND KM COME BAKE.....

aposig
19th April, 2012, 02:31 PM
WHERE ERORS ????

proaudio
19th April, 2012, 02:34 PM
1.I REMOVE BATERRY
2.REMOVE DASH AND BCM
3 change mileage in IC and BCM.
4 PUT BACK DASH AND BCM
5 CONECT BATERYY
6.OPEN DOR
7 SEE AT DASH 133200 KM
8 PUT KEY IN CASY ,AND START CAR ....THREE SECONDS AND KM COME BAKE.....

WRONG!
This is not "Francuass"
Give your eMail, Ill send some stuff to read to you.

aposig
19th April, 2012, 02:42 PM
SEND MAIL AND SKYPE VIA PM THANKS

proaudio
19th April, 2012, 02:46 PM
And how much Euros would you take for the job?

aposig
19th April, 2012, 02:52 PM
THANKS FREEND VERYY INTRESTING I TRY !!!AND SENT RESULTS

aposig
19th April, 2012, 02:52 PM
IN OUR COUNTRY ..250 EUROS

proaudio
19th April, 2012, 03:03 PM
If OK, 100Eu belongs to me =DD

PremierD
19th April, 2012, 03:19 PM
Not OK mate !!!

bkenigma
19th April, 2012, 05:30 PM
Thank god these can all be done by OBD now. What a pain n the ARSE these use to be. Enigma does the BCM and Dash only. I know that when they originally released the sw it was like DP3 and you had to drive the car for 50km before all modules synced. Also you need to clear inspection if this is an S80 after all is done. Abritus and Smok finally got volvo down pay it seems like, havent had any issues since i started using new abritus sw and new smok sw.

bkenigma

Ramzai
19th April, 2012, 05:54 PM
IN OUR COUNTRY ..250 EUROS

It is necessary to correct other blocks... ;)

aposig
20th April, 2012, 10:30 AM
THOLVED!!! THANKS FOR ALL!!!!!!!

z786
20th April, 2012, 11:37 PM
smelecom does these in under 2 mins

Meat-Head
21st April, 2012, 05:52 PM
Thank god these can all be done by OBD now. What a pain n the ARSE these use to be.


*CONFUSED*

WHY would anybody want a horrid Vulva IN-correcting, but WHY would anybody WANT to work on the horrid things.

Just why why why?

Do old people with flat caps no longer drive them or something?