Log in

View Full Version : DM800 Tuner not found (DM800HD PVR (clone))


bartb
18th April, 2012, 11:33 AM
Hi all,

I see a lot of posts out there which refer to this problem, but for on thing the post are old and do not really provide a good solution to the problem.
So here goes again:
After the "No CA Found" problem and flashing the SSL with null-modem cable, I can flash any image, but none of them solve the problem where the dreambox cannot find the tuner anymore. Obvioulsy before that it did work and tried all the options in the menu (incl. the 'right button")

To me it really looks like I am still loading a wrong image.

Is there anyone who has been dealing with the same, and who discovered the one an only right image to use?

I already tried SIM201 Blackhole, OpenPLI.

Anyone?

thanks.
DBTraitor
18th April, 2012, 12:29 PM
Tuner not found could be a wrong tuner.
ASTROBOX
18th April, 2012, 01:02 PM
Hi all,

Is see a lot of posts out there which refer to this problem, but for on thing the post are old and do not really provide a good solution to the problem.
So here goes again:
After the "No CA Found" problem and flashing the SSL with null-modem cable, I can flash any image, but none of them solve the problem where the dreambox cannot find the tuner anymore. Obvioulsy before that it did work and tried all the options in the menu (incl. the 'right button")

To me it really looks like I am still loading a wrong image.

Is there anyone who has been dealing with the same, and who discovered the one an only right image to use?

I already tried SIM201 Blackhole, OpenPLI.

Anyone?

thanks.
Because your image,BL & driver is not tele my advise is to reflash box with a patch image for clone 800HD be more specific on which image with which BL your box is using before this incident & be sure your box is sim 2.01
Tdanish
31st August, 2012, 11:37 PM
Dear Bartb,

I have the exact same problem here.... did you ever find a solution for the NO TUNER Problem
DBTraitor
1st September, 2012, 01:17 AM
remove and resit your tuner
dzqv53
18th September, 2012, 08:47 AM
That happen to me when i try to update the system updates from the box. Worst case it may even stuck at boot.

Re-flashed it with my backup and its done!