Eurovox PVR EX5100 Channels

[hoopy09]

Hi guys just got the box done a deep scan, all the channels are there, but when i put it on sky sports 1 it says Scrambled channel.

Any help would be much appreciated guys cheers.

[camelv]

not sure about this box but think you might need to do a factory reset first

[hoopy09]

not sure about this box but think you might need to do a factory reset first

How do i do that mate. am quite new to these kind of boxes.

[camelv]

as i said i havnt had one of these although i do have a couple of e/vox boxes ,it should be the same .
go to menu
go to config
go to clear data
enter pin
select factory reset
delete all channels will come up press ok then do a power scan.

check this link first m8

http://www.digital-kaos.co.uk/forums/f71/guide-eurovox-scanning-settings-9789/

[hoopy09]

as i said i havnt had one of these although i do have a couple of e/vox boxes ,it should be the same .
go to menu
go to config
go to clear data
enter pin
select factory reset
delete all channels will come up press ok then do a power scan.

check this link first m8

http://www.digital-kaos.co.uk/forums/f71/guide-eurovox-scanning-settings-9789/

Done that mate still no change.

[Lanxman]

Hoopy, Have you flashed the box with the correct firmware before scanning?

[hoopy09]

Hoopy, Have you flashed the box with the correct firmware before scanning?

Not done that mate, thought it would have been flashed when i got it lol. quite new to this.

Is there anyway i could flas it without the Serial Null Modem Cable as i dont have one?

[Lanxman]

No sorry mate you have to use a null modem cable for that box, Can't be done via usb. Also, If you have a fairly new desktop/laptop you will need a null modem cable to usb adapter as well as a null modem cable. Boxes no longer come pre flashed.

[hoopy09]

No sorry mate you have to use a null modem cable for that box, Can't be done via usb. Also, If you have a fairly new desktop/laptop you will need a null modem cable to usb adapter as well as a null modem cable. Boxes no longer come pre flashed.

Yeah i have the null cable, but my pc is quite new, dont have null modem cable to usb adapter.

So i will need to buy one of those? to get it working.

[Lanxman]

Yes, unless you know someone who has a really old pc or if you have an old one lying about. Failing that you will have to buy one, You can get them from maplin's but they're about ?20 from there, you should be able to pick one up cheap on flea bay

[camelv]

sorry m8 thought you had already flashed box ,

[hoopy09]

cheers guys will need to get one 2moro.

[Lanxman]

No worries mate, If you have any issues with flashing when you get it have a look round the forums there's loads of help in this topic.

[Paul R]

i have exectly the same problem with nick jnr 2

which my little lad loves , av got all the latest firmware and it still says scrambled channel

[HiTeck]

i have exectly the same problem with nick jnr 2

which my little lad loves , av got all the latest firmware and it still says scrambled channel

On the nick jnr 2 channel press info twice, take a note of the freqs it will show at the top left hand side.

Now go to Menu, Installation, press OK on User Installation, Enter pin 0000, Highlight the Freqs you noted before by pulling down on your remote then press OK so a tick appears at the side then press manual scan which is the "blue button". Leave it to scan usually takes around 30 seconds then exit back to nick jnr 2 and now the channel should be working..

[Paul R]

On the nick jnr 2 channel press info twice, take a note of the freqs it will show at the top left hand side.

Now go to Menu, Installation, press OK on User Installation, Enter pin 0000, Highlight the Freqs you noted before by pulling down on your remote then press OK so a tick appears at the side then press manual scan which is the "blue button". Leave it to scan usually takes around 30 seconds then exit back to nick jnr 2 and now the channel should be working..



your a ****&&in gent cheers mate, evan thou your a manc haha i thank you for your help worked perfect,

ad love to know how you knew to do that haha

[HiTeck]

Common problem mate ;) glad your KIDS are sorted.

[todd88]

Hi just recently bought eurovox 5100, all channels are scrambled except itv bbc etc. Does This Mean i will have too flash the box before i get all other channels , and how do i do this ? Thanks :celticscarf:

[badapple]

YES m8, u are getting the free view channels. To be able to get the scrambles channels follow these guides and you're be OK.
>http://www.digital-kaos.co.uk/forums/f71/guide-cables-required-flashing-eurovox-9786/
>http://www.digital-kaos.co.uk/forums/f71/guide-how-flash-eurovox-9790/
>http://www.digital-kaos.co.uk/forums/f71/eurovox-receivers-firmware-9787/
>http://www.digital-kaos.co.uk/forums/f71/guide-eurovox-scanning-settings-9789/
If u are based in Ireland, then use this firmware>http://www.digital-kaos.co.uk/forums/f71/ireland-nagra-2-fix-ex1000sl-ex5000-ex5100-46868/
If u get stuck, post back and someone will help u out m8.

[todd88]

Thanks Mate , Got it sorted :D cheers for the help

[curtispage]

Thanks for the guides they were of great help!