Audi A4 pin fron dash dump plz

[makura]

Can any one help with the pin code for this Audi A4 with a Bosch cluster with 28c08.Its a 2002 model.
Thanks

[makura]

I just read the ecu and got pin code 02144 but when i try to program a key to the car it says not correct pin,i think my dash dump is corrupt.any one with a good dump for this car?

[makura]

Dump from ecu 8E0 909 556L

[d2mike]

Can any one help with the pin code for this Audi A4 with a Bosch cluster with 28c08.Its a 2002 model.
Thanks

Hi!

Your instrument cluster is a crypted RB4 one.
Retreiving the pin/skc is only possible via obd or via the ecu dump.

Unfortunately I don't have a ME7.x calc here at my office ...

Cheers,
d2mike

[makura]

Hi!

Your instrument cluster is a crypted RB4 one.
Retreiving the pin/skc is only possible via obd or via the ecu dump.

Unfortunately I don't have a ME7.x calc here at my office ...

Cheers,
d2mike
Yes,i got pin from ecu put cluster wont accept it,if any one can correct my cluster dump please.

[d2mike]

Yes,i got pin from ecu put cluster wont accept it,if any one can correct my cluster dump please.

Your dump doesn't look corrupted, or do you have DEF or ERROR in odo?
How do you calculate pin from ME7.x? I think you retrieved the wrong skc...

[keygargoil]

are you using a can chip pin 02144 cs 1E ED 81 0B EC 90 CE

[makura]

are you using a can chip pin 02144 cs 1E ED 81 0B EC 90 CE
Well that pin is not working,i used my Orange 5 programmer to calculate the pin from ecu dump,but if i try using the dash dump it says the dump is corrupt.
I don't have a programmer that can write Megamos 48.

[makura]

How about a virgin file with 3500km on it or immo off my ecu file,or add key BD 93 7F 0B to the dash dump?

[makura]

Can any one please correct my dump plz

[lupu_sandu]

No virgin file on dump. Only via OBD2.
Use kkl>com and vag eeprommer v1.19 to read pin code from dash.
If pin is not accepted did u check lock time in intrument cluster?

[makura]

Thanks,i checked security wait time,it 00min and when i entered the pin it said wromg pin and security tim went to 10min,waited and tried again with same results.I am trying to find vag eeprommer v1.19 but its proving to be a mission,do you have?i have tried reading the pin from dash using AD100 but its failing,when i try SBB it says pin unavailable.
I think the dump needs to be repaired.

[lupu_sandu]

SW here: http://www.digital-kaos.co.uk/forums/f178/vag-eeprom-programmer-1-19-false-true-235666/

You can find also a video posted by me, how to read a RB4

[makura]

Just used the program and this is what i got when i read access code

[lupu_sandu]

Wtf? Did u watch video?

Audi RB4 - YouTube

[makura]

Yes i have watched the video,i have read the eeprom in decrypted mode and thats the file i get fron access code.Code 2144

[makura]

Finaly got it right a big thank you go to lupu_sandu my life saver.

[Meat-Head]

Finaly got it right a big thank you go to lupu_sandu my life saver.


Sorry, just leeching for a job.

If Lupu_Sandu can't save your life NOBODY can.

HTH

Meat

[Meat-Head]

are you using a can chip pin 02144 cs 1E ED 81 0B EC 90 CE

just for fun, how do you work it from numbers to hex please?

Say a member needs to change a code from say

1027 to say 2598 - damm wish wrote it down.

THANKS.