audiomeca
20th April, 2012, 05:53 PM
Hello
I have 13191825 airbag ecu, with crash impact store in memory .
Today read the eeprom from the motorola MC9SDG128E/ 1L40K I read with x-prog I read and verify 3 times, and all times identical checksum, I see the dump in the hex editor, I think that the dump is ok, I can read the vin.
Open the crash eeprom file in the airbag 1.0 utility from www.auto-by.com (http://www.auto-by.com) and erase crash, write new eeprom file to the motorola procesor, and verify checksun, all ok
install in the car, and not crash error present, but two new errors,
B1000 - (39) Replace Electronic Control Unit (ECU)
Symptoms: internal electronic failure / discard
Status: Present
B1001 - (3A) EEPROM Not Programmed
Symptoms: incorrect component installed
Status: Present
I check actual valours, and all airbags and pretensor are detectec with the righ resistence.
but not can delete dtcs, diagnose respond not posible,
can any help me?
I put the two files original and clear
regards
I have 13191825 airbag ecu, with crash impact store in memory .
Today read the eeprom from the motorola MC9SDG128E/ 1L40K I read with x-prog I read and verify 3 times, and all times identical checksum, I see the dump in the hex editor, I think that the dump is ok, I can read the vin.
Open the crash eeprom file in the airbag 1.0 utility from www.auto-by.com (http://www.auto-by.com) and erase crash, write new eeprom file to the motorola procesor, and verify checksun, all ok
install in the car, and not crash error present, but two new errors,
B1000 - (39) Replace Electronic Control Unit (ECU)
Symptoms: internal electronic failure / discard
Status: Present
B1001 - (3A) EEPROM Not Programmed
Symptoms: incorrect component installed
Status: Present
I check actual valours, and all airbags and pretensor are detectec with the righ resistence.
but not can delete dtcs, diagnose respond not posible,
can any help me?
I put the two files original and clear
regards