renault megane scenic

[radiosolutions]

need mileage at 64000 miles, in attached dump. please state i need in miles and not km. thanks

[radiosolutions]

is there any software were i could change mileage myself, any help would be superb, thanks

[cokolo]

Which original mileage in your dump ?

[radiosolutions]

around 184000 miles. thanks

[sherl645]

Hi,
What age is this car?

[cokolo]

Read dump 16 x not 8 x

[foken]

I think your dump is not correct. What year is this car?

sorry for my lang...

[radiosolutions]

its a 2004 reg, thanks

[foken]

ok. so you need read this again like cokolo said...

[albertros]

hi,
here you go, you may have to reverse bits

[radiosolutions]

here is the revised dump, read as 8 bit as the first one was 16 bit. see attached, thanks

[foken]

I thin you need try read this again in 16x and use program:

DashBoardScenic2VERSION 0.8


regards

[radiosolutions]

here is dump read in 16 bit, thanks

[radiosolutions]

sorry my info is wrong my clocks have around 18000, and not 184000, thanks

[radiosolutions]

here is dump read in 16 bit, thanks
there is oinly around 18000 on these clocks and not 184000 as previously stated, thanks

[foken]

one time when i read dump with 1 broken pin in my programmer was exacly same problem. I can`t read your dump. after that i use XPROG M read dump, rapair with program from my prievius post, i put vin from car and it work fine.

regards

[radiosolutions]

hello friend thanks for info,i will try another programmer. the program you sent to modify mileage could you explain how to use. i no it reads original info,but how do i modify it,when i change info and press repair just goes back to original info, thanks

[foken]

when you have broken (corrupt) file you press repair, if your file is ok just change what you need and press save. Mine dump was corrupt so i press repair , i put my vin and press save - it always works.

regards

[radiosolutions]

can someone help, i use albertros is dump now my speedo does not work at all. no display. thanks

[albertros]

Hi,
like a I said you need to reverse the bits.
Search on here for licznic it has a reverse button "x-y "

[AGCNET]

salut a tous pliz send flach mimwar megane scenic 1.9 dci fairway anne 2002