PDA

View Full Version : thermal protecion ?



davidyeva
20th April, 2012, 08:14 PM
thermal protecion not find in my ecu ppd1.5
can help me?

davidyeva
21st April, 2012, 02:34 PM
nobody knows anything about this question?

davidyeva
25th April, 2012, 07:02 AM
Help me plese

Stanton
25th April, 2012, 07:34 AM
Charge ait temp for compressor limit?
Exhaust gas temp for turbine limit?

What are you actually looking for?

spawns3
25th April, 2012, 11:06 AM
maybe the second "Exhaust gas temp for turbine limit".

Cheers

davidyeva
25th April, 2012, 11:58 AM
is that I have a repro made my passat ppd with 1.5 and not more iq of 67 mg, and that will not.
thanks for replying
sorry for my english.

davidyeva
25th April, 2012, 09:10 PM
whom I can check this mod file?

filecloud
25th April, 2012, 10:05 PM
whom I can check this mod file?
This car is passat BKP engine. 2.0 R4 2-valve PPD with 140bhp. Standard fuel limitation goes up to 70mg and "thermal protection" works over Nm not over fuelling value. It kicks in at values way over 420Nm.
How to solve problem?
Run your logs with VCDS and check which value REALLY limits the power. It shurely is not thermal protection in this case!
greetings,
filecloud

davidyeva
25th April, 2012, 10:49 PM
thanks for answering.
the engine is a VW Passat 2.0 TDI 140 hp and 8v not 16v.
where I check with the VCDS which is the limitation?
bosch ecu is a look at the iqs on channel 8 but in a Siemens?
thanks

filecloud
26th April, 2012, 06:00 AM
the engine is a VW Passat 2.0 TDI 140 hp and 8v not 16v.
Read carefully! That is exactly what i wrote above. 2 valves per cylinder and 140bhp. Engine code BKP.

davidyeva
26th April, 2012, 08:59 AM
the engine is a 2.0 TDI 16-valve, there are also the 2.0 tdi 8 valves but mine is 16v.
As we do not understand because I'm using a translator because I'm from Spain.
the only channel that marks the VDCs IQ is on channel 1.
and look carefully and saw nothing.
regards

filecloud
26th April, 2012, 09:12 AM
the engine is a 2.0 TDI 16-valve, there are also the 2.0 tdi 8 valves but mine is 16v.
As we do not understand because I'm using a translator because I'm from Spain.
the only channel that marks the VDCs IQ is on channel 1.
and look carefully and saw nothing.
regards

Ok. You are right.
But anyways. Thermal protection does not limit your engine. You have 320Nm original and will most likely not reach 430Nm with chiptuning.
greetings,
filecloud

davidyeva
26th April, 2012, 10:17 AM
I have already modified the file but there is something I is limiting the iq and what is not.
the torque is not, that is already modified and the whole file as well but something is not what it is, these are very complicated siemens.
if you sent the file and the original mod I haver can have a look if you see something that limits the iq to 67mg?

filecloud
26th April, 2012, 10:29 AM
Hello
Make logs with VCDS and post them here.
greetings,
filecloud

davidyeva
26th April, 2012, 01:16 PM
ok here are some logs

spawns3
26th April, 2012, 01:20 PM
ok here are some logs

where ? ... :rolleyes:

Already see it ;)

davidyeva
26th April, 2012, 01:41 PM
are logs but the problem is the iq, iq not give more consegimos
why?

filecloud
26th April, 2012, 01:55 PM
are logs but the problem is the iq, iq not give more consegimos
why?
iq dropping with rpm. drivers wish properly done?

davidyeva
26th April, 2012, 07:11 PM
if the desire of the driver is ok, it must be another limiting

filecloud
26th April, 2012, 08:00 PM
if the desire of the driver is ok, it must be another limiting
it can be everything when the tuning is not done properly...

davidyeva
27th April, 2012, 01:59 PM
I do not understand what I mean. the thermal map is 7B88C protecion 16x16?
this engine is not FAP 2006.

filecloud
27th April, 2012, 02:20 PM
I do not understand what I mean. the thermal map is 7B88C protecion 16x16?
this engine is not FAP 2006.
;-) We see that you do not understand yourself.
You think it is thermal protection and it holds back your engine? Then change it and make a test drive. Nothing easier than this.
But i give you a hint:
It is not. You find this map 100% same on the R4V4 BMN engine with 170bhp. And every tuner can push it up to 195 or 200bhp without touching this map. And those cars do more than 70mg then. Your map is "ip_tqi_mon"
greetings,
filecloud

davidyeva
27th April, 2012, 02:56 PM
the map and touch it but nothing, the IQ remains the same.
I can upload the file mod here. aver if you help me '

filecloud
27th April, 2012, 03:02 PM
I think i helped you enough.
Post your file here for everone to see. Maybe someone will have a look and give a comment, maybe not.
I will not make you a free working tuningfile if you hope on that.
greetings,
filecloud

davidyeva
27th April, 2012, 04:02 PM
thanks for all filecloud I do not want to do me a tuningfile, I have it but I have made several that problem with the iq is limiting and I do not know why and where it comes.
anyway if someone wants to look it sent by mp.
regards