W203 545 06 08 EIS full flash needed

[sss123456]

Hi brothers,

Need to replace EIS faulty chip 1J35D with new 2J74Y, need to flash em !

EIS Model: 203 545 06 08

Chip inside : 1J35D x 2

Can please provide me full flash of the EIS ?

Thank you very much ! :help:

[lashkar97]

check this may be use able for you

[sss123456]

Looks not suitable, file size is too small. I need full flash area, because replacing with a new 2J74Y

[lashkar97]

the dump i send u its full flash but in bin format so its size is
small . tri it will work 100%

[sss123456]

just to make sure, this is the flash for the MCU stored the key data , right ?

[makura]

Can some one pliz calculate keys for the old motorola key please(041)

[lashkar97]

just to make sure, this is the flash for the MCU stored the key data , right ?
i read data by ETL and its full dump.

[lashkar97]

makura your file is not ok

[doslamer]

Hi brothers,

Need to replace EIS faulty chip 1J35D with new 2J74Y, need to flash em !

EIS Model: 203 545 06 08

Chip inside : 1J35D x 2

Can please provide me full flash of the EIS ?

Thank you very much ! :help:




Try this flash use r270 or omega programmer.

[lashkar97]

Can some one pliz calculate keys for the old motorola key please(041)
tri this makura .........

[sss123456]

Try this flash use r270 or omega programmer.

I only have ETL 908 programmer, will try with ETL.

[JOHNCICY]

I only have ETL 908 programmer, will try with ETL.
I USE THS EVERY TIME I CHANGE 4J74Y TO 2J74Y......VIA ETL.WORKS 100%

[sss123456]

JOHNCICY (http://www.digital-kaos.co.uk/forums/members/242140-johncicy/) your dump doesnt work. I am changing 1J35D to 2J74Y, different software.

i going to try lashkar97 (http://www.digital-kaos.co.uk/forums/members/290516-lashkar97/) flash file.

[sss123456]

lashkar97 (http://www.digital-kaos.co.uk/forums/members/290516-lashkar97/) your file only contains EEPROm data, look at the address.

[sss123456]

i read 1J35D as 4J74Y, can get the flash data and eeprom , please help me verify flash data correct ?

That is MCU 1 with i220 label on it.

Is it possible to work if i replace 2x1J35D with the files from w203 196670 and 196671 which is a different software ?

[icogsm]

this 100% worked dumps for mask 1J35D mcu 196938 /196939
for compare
may by helped
b.r.
soft for 2j74y/4J74Y diferent- MCU 196670/196671
b.r.

[sss123456]

icogsm, does that mean if i change to 2J74Yx2, i must use 196670 and 196671 flash ?

and put it back to the same EIS ?

Tomorrow i will change both mcu to 2J74Y with 196670 196671 flash


Dump compare is perfect ! thanks mate !

[lati]

icogsm please pass for postet dump
203 545 06 08.rar (http://www.digital-kaos.co.uk/forums/attachments/f178/119965d1336318046-w203-545-06-08-eis-full-flash-needed-203-545-06-08.rar)

best regards

[sss123456]

tested, by using 2J74Y flash and 1J35D eeprom, it doesnt work.

when you compare dump, the KM MCU, 1J35D has totally different format compare to 2J74Y version. one start with 00 one start with 5A.

Any method to convert MCU2 (km) eeprom from 1J35D format to 2J74Y format ?

[smayer]

tested, by using 2J74Y flash and 1J35D eeprom, it doesnt work.

when you compare dump, the KM MCU, 1J35D has totally different format compare to 2J74Y version. one start with 00 one start with 5A.

Any method to convert MCU2 (km) eeprom from 1J35D format to 2J74Y format ?

like to suffer? Why not buy a EZS equal and write EPROM dump from old?
Is the most cheap solution.:viking:

[mexanico1971]

this is a w203 c220 2005 EZS is temic and dash is VDO
I got to put in 95000kms , this is my first time i gonna make a Mercedes .
Anyone know what kind of mcu it"s have ?
I have my old Xprog and to read it what mcu should I select ?!
I find a way to take out the atmel 24c16 , without take the needls out, just make a "L" width soldering iron !
I hope that is the 24c16 I need to read, I gonna lef one pic of him !
and one of the temic I have !

best regards to all

[sss123456]

this is a w203 c220 2005 EZS is temic and dash is VDO
I got to put in 95000kms , this is my first time i gonna make a Mercedes .
Anyone know what kind of mcu it"s have ?
I have my old Xprog and to read it what mcu should I select ?!
I find a way to take out the atmel 24c16 , without take the needls out, just make a "L" width soldering iron !
I hope that is the 24c16 I need to read, I gonna lef one pic of him !
and one of the temic I have !

best regards to all

come on, dont simply bump in.

EZS: MC9S12DT128B

dashboard only 24c16.

[mexanico1971]

Hi !
my xprog dont have this mcu MC9S12DT128B in the program i"m use 4.5 !
what mcu should I select ?!
I read the 24c16 and put 95000km and I liv it here if someone need it !
sorry

[sss123456]

buy rosfar, i use it for thiss kind of job, very reliable.

[sss123456]

after many trial and experiments, really learnt a lot, thanks guys.

[harryauto]

Can some one pliz calculate keys for the old motorola key please(041)

I don't know what programmer to read the data , the data address is wrong , eprom address is from 800-9FFF , change it if u no rewrite the data and it must ok 121249

[harryauto]

My skype : harryauto

Don't waste your time ...
I see the lashkar97 data is not work , Johncicy data only one can not syn ,not work
I don't understand ,someone to answer back , he sure or not 100% work and post it ,
looking for me AND send to u data .....

[sss123456]

Bro i got you added in skype. lets discuss more on this by skype. Thanks !

[benyse]

hy send me please the pass for this file . Thanks

[luisblas]

pass plis.

[sss123456]

Hey guys, does anyone successfully replace 1J35D using 2J74Y ? i have the exact same case again.
Cant find the right used EIS. It is a w203 EIS with 196938, 196939 marking on it.
If you have full flash for it please share with me ?

Your help is highly appreciated.

[ecumasters]

not possible
1j35d dont have flash rom

[smayer]

You can replace if use one mcu from another ezs

[ecumasters]

You can replace if use one mcu from another ezs

must same number of the ezs

[smayer]

must same number of the ezs

Don?t need same part number, just same ezs board (w203 4 plug?s)

[3abas27]

Swapping ONly cpu1. 1j35d for keys with new one 2j74y already programmed for keys Is enough or need also cpu2 also?

[papalos_]

this 100% worked dumps for mask 1J35D mcu 196938 /196939
for compare
may by helped
b.r.
soft for 2j74y/4J74Y diferent- MCU 196670/196671
b.r.Is it possible to write both flash data(keys + KM)to new pair of 2J74Y and make EZS working as A2035450608?

[MuxaH]

Is it possible to write both flash data(keys + KM)to new pair of 2J74Y and make EZS working as A2035450608?

Intrested in this too.

[hrmotorsport]

@icogsm please can yu give me pass ? i cant send pm at this moment i dont know why

https://www.digital-kaos.co.uk/forums/showthread.php/267310-W203-545-06-08-EIS-full-flash-needed?p=1548565&viewfull=1#post1548565

[Mayowa]

Please i need flash dump for w203 eis

[Mayowa]

I program w203 key but it will accept the key but the key will not turn,so i try to change the eis i read the eeprom and the flash of the old eis and write them back to the new eis but the new eis is still doing the same like the old eis,i don't know if any one can help me out

[droidwayne65]

I program w203 key but it will accept the key but the key will not turn,so i try to change the eis i read the eeprom and the flash of the old eis and write them back to the new eis but the new eis is still doing the same like the old eis,i don't know if any one can help me out
Check the ESL.

[hrmotorsport]

I program w203 key but it will accept the key but the key will not turn,so i try to change the eis i read the eeprom and the flash of the old eis and write them back to the new eis but the new eis is still doing the same like the old eis,i don't know if any one can help me out

As said droidwayne, esl its faulty, program an emulator to know if its the problem


Enviado desde mi iPhone utilizando Tapatalk

[alkazav]

this 100% worked dumps for mask 1J35D mcu 196938 /196939
for compare
may by helped
b.r.
soft for 2j74y/4J74Y diferent- MCU 196670/196671
b.r.

hello, can I get pass for this dump. Thanks