Mb w203 2004 ecu edc16

[kaToo]

hi all
I am having truble with one w203 year 2004 with ecu edc16

The car is not starting and with star is saying like the car is allredy started ...
i am getting error 2045-002 .
i read the ecu and made it virgin and code it with star but still same problem . the car won't start .
Maiby the flash in ecu is corrupt ??

Can anyone help me with this ....

Atached is eeprom and flash that i read from ecu

Bosch 0 281 011 741


Thanks

[jokersat]

more info

engine crank or not

when you turn the key fan work or not

if FAN work when you trun the key position 2 = ecu broken

you must change it

clone original dumps to second ecu with bdm


all will be fine

[kaToo]

No the fan is off no cranking
the only fault with star is one sensor that tells that the motor is runing ... we check the sensor still same we disconect the sensor and the star again says that the motor is working... (in fact it is off )

[jokersat]

when you want to start the car engine crank or not

if no pls read memory default en ezs and sam

then post it

[kaToo]

hi friend
No the engine is not Cranking ...

[jokersat]

are you chek all fuse and relais

1 pls check fuse and relais in Sam module

2 remove batrie check all wires this can be the problem 70 %

[kaToo]

I will check tomorrow but i am not getting any error on sam ...

[kaToo]

the sensor that is saying that is ON ALL time is wired to the ecu . (i am not sure about pin i think it was 38-39 ..)
I check all that you told me but all is fine ..

[kaToo]

I check all and i am sure that the problem is in ecu. if any one have a good bdm reading please share it with me.

Thnx

[jokersat]

post refrence ecu like 0281 xxx xxx

[kaToo]

0281011741