FORD FOCUS 9M5T 14B321 BA

[stepanov]

Hi , can some one help me to clear crash.
I tried to clear dump but it don't work.

module : 9M5T 14B321 BA
BOSCH 0 285 010 699

Thank you.

[srscrash]

I would like to help, you can test this dump,must be ok !
Best regards,
Please tell me if it was ok
the pass will be sent by pm

[stepanov]

I would like to help, you can test this dump,must be ok !
Best regards,
Please tell me if it was ok
the pass will be sent by pm

I tested today , but its don't work.
Why it not work? May be is resistors of airbags I installed on 2.8Ohm?

[Shmortz]

2.8 Ohm is ok
what DTC's are stored?

[stepanov]

2.8 Ohm is ok
what DTC's are stored?

After switch on ignition, airbag lamp lights and in 2 seconds off but in 5 seconds light again. DTC i will can read by OBD and its only on Engine , I have not ford diagnistic adapter.

[Dane-Elec]

After switch on ignition, airbag lamp lights and in 2 seconds off but in 5 seconds light again. DTC i will can read by OBD and its only on Engine , I have not ford diagnistic adapter.
Hi

You need to make diagnose, without that you never know what is rung..

Dane

[srscrash]

then "J" or Dane, or "know everything" with so much wisdom that you have not guess the problem of our friend?
I know ... you just want leadership, careful, yet end up badly.

[morfej]

After switch on ignition, airbag lamp lights and in 2 seconds off but in 5 seconds light again. DTC i will can read by OBD and its only on Engine , I have not ford diagnistic adapter.

If you have at least ELM327 interface (you need to modify it a bit to connect to MIDDLE CAN where RCM is) use ELMconfig (check the fordownersclub forum) to
diagnose RCM.

br

[nicolaus]

hi if is usa model u have to clear the passanger seat module it has crash data in the seat ocsm clear the seat with a scanner turn ignition off wait 5 secound turn on read dtc if still the light on

[stepanov]

then "J" or Dane, or "know everything" with so much wisdom that you have not guess the problem of our friend?
I know ... you just want leadership, careful, yet end up badly.

Could you say please, your clear dump is realy ok or you not sure

[srscrash]

stepanov, this file must be ok !
but, watch carefully post by member morfej ,
is a real "PRO" in this area
BR,srscrash