View Full Version : AUDI A4 RB4 REPAIR
ANCO
26th April, 2012, 02:49 PM
Hello, can be repaired "AUDI A4 RB4" do not work clockwise??.
Thanks in advance.
d2mike
26th April, 2012, 02:54 PM
Hello, can be repaired "AUDI A4 RB4" do not work clockwise??.
Thanks in advance.
Hi,
what do you mean by "clockwise"?
Cheers, d2mike
ANCO
26th April, 2012, 03:28 PM
Sorry my English is not good, clockwise= "Watches"
Hi,
what do you mean by "clockwise"?
Cheers, d2mike
d2mike
26th April, 2012, 03:31 PM
Sorry my English is not good, clockwise= "Watches"
Oh, so you mean, that the dials/gauges are not working?
If you have problem with the English language please use Google Translator to translate from your language to English.
Cheers,
d2mike
ANCO
26th April, 2012, 08:12 PM
ok the dials/gauges do not work.
thanks
Oh, so you mean, that the dials/gauges are not working?
If you have problem with the English language please use Google Translator to translate from your language to English.
Cheers,
d2mike
d2mike
26th April, 2012, 08:34 PM
ok the dials/gauges do not work.
thanks
Are you able to post the dump of the dashboard?
ANCO
26th April, 2012, 09:03 PM
Are you able to post the dump of the dashboard?
Thanks again, this is correct?
dialab
27th April, 2012, 05:06 AM
Some Your cluster adaption channels are empty.
Check channels 060,061,062 (Also with 0 value are 003,035,030,032,033)
In 061 You have something, but i guess there must be something else.
Can be done with VAG COM (VCDS) very easy.
ANCO
27th April, 2012, 01:52 PM
Some Your cluster adaption channels are empty.
Check channels 060,061,062 (Also with 0 value are 003,035,030,032,033)
In 061 You have something, but i guess there must be something else.
Can be done with VAG COM (VCDS) very easy.
Correct these channels are empty, I checked with VASPC
The code that stores the instrument
00576 027
Borne 15
Signal implausible
connector A pin3= +15 ok
connector B pin22= +15 ok
connector A pin2= +30 ok
dialab
27th April, 2012, 02:05 PM
You must add correct values to these channels what there must be in this car.
VCDS will show You adaption channel values.
conan981
13th September, 2012, 10:54 AM
hi guys , i have the same problem ERROR 00576 on my audi a4 cluster.
ERROR 00576 027
Terminal 15 Signal implausible
can you explain better to me how did you solved it?
dialab wrote :
You must add correct values to these channels what there must be in this car.
how can i know the original values ?
thanks in advance!
d2mike
13th September, 2012, 08:08 PM
hi guys , i have the same problem ERROR 00576 on my audi a4 cluster.
ERROR 00576 027
Terminal 15 Signal implausible
can you explain better to me how did you solved it?
dialab wrote :
how can i know the original values ?
thanks in advance!
Hi,
VCDS shows you the possible values.
Just take your windows calculator and sum up the values.
You should know what is installed and what not!
Cheers,
d2mike
conan981
13th September, 2012, 09:26 PM
just recoded the adaptation channels 60,61 and all went OK again! thanks to all!
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.