PDA

View Full Version : BMW E60 2.0diesel edc16c35 messed around?



z786
26th April, 2012, 07:05 PM
hi, can some1 tell me if this file is standard, been tuned and also if dpf is still running plz

thanks

spawns3
26th April, 2012, 09:09 PM
The bosch ref. it's 0281012754 from a automatic car ?It's a EDC16c31 not edc16c35 :|

Morette
26th April, 2012, 10:21 PM
Driver's wish has 8% added to it, so modified.

z786
26th April, 2012, 11:11 PM
car is manual

mpps told me its a c35 when i used id function so i read it as a 3.0 :)

what does 8% mean mate?

is dpf still intact?

Morette
26th April, 2012, 11:19 PM
Driver's wish is the torque request in Nm for pedal position.
The last two rows of this have 8% more torque requested which is unlikely to be a BMW change.

spawns3
26th April, 2012, 11:21 PM
car is manual

mpps told me its a c35 when i used id function so i read it as a 3.0 :)

what does 8% mean mate?

is dpf still intact?

Try to read in serie 3 with edc16c31 . Because ur file is only 1mb , and the file i have is from a e90 with same hw&sw but have 2mb .

The driver wish is increased 8% from original.

spawns3
26th April, 2012, 11:27 PM
Driver's wish is the torque request in Nm for pedal position.
The last two rows of this have 8% more torque requested which is unlikely to be a BMW change.

Do u have the original file ? Post here .

alfy
26th April, 2012, 11:39 PM
If car is 2006+ than is c35, but file is reas as c31!
You have only 1mb file instead 2mb, so don't write it!


Tip for all:
DON'T MESS ON BMW WITH MPPS!

spawns3
26th April, 2012, 11:44 PM
If car is 2006+ than is c35, but file is reas as c31!
You have only 1mb file instead 2mb, so don't write it!


Tip for all:
DON'T MESS ON BMW WITH MPPS!


Mate he select edc16c35 and only read out 1mb , so the ecu is a edc16c31.
I never had problems with mpps on bmw. why u say that ?

Morette
27th April, 2012, 12:36 AM
Do u have the original file ? Post here .

I don't have an original, but I have other 320d and 520d files.
Not a lot matches, but you can spot some tuning with a large red square of % difference!

gezame
27th April, 2012, 01:29 AM
hi, can some1 tell me if this file is standard, been tuned and also if dpf is still running plz

thanks

Hi
The file is not standard, really badly modified (all modified turbo maps percentage, all 9%).
Turbo limiter function of atmospheric pressure, dangerously modified, etc, etc.
Dpf not removed.
Here you have an original file, read by obd with cmdflash, I've also changed his reading of MPPS to make a 2 meg file, and you can compare the original file.
I would not write this type of ECU with MPPS clone, you just have to look for information in forums about the problems of MPPS and these ecu.
Br.

alfy
27th April, 2012, 01:00 PM
Mate he select edc16c35 and only read out 1mb , so the ecu is a edc16c31.
I never had problems with mpps on bmw. why u say that ?


Never seen E60 series with 2.0 163hp with EDC16C31!!!

EDC16C31 was used on early (2004+/-) E60 with 2.5 177hp and 3.0 with 218hp only!

obnchip
27th April, 2012, 01:17 PM
I see!I done the same car with the same softver.it was edc16 c31

filecloud
27th April, 2012, 01:56 PM
Hello Ladies
Here is your 100% original file. Datablock is enough to read/write on those ecus. 0281013251 was the box number and Bosch online catalog lists it as EDC16C35-2.12
Have a nice weekend,
filecloud

donesko
28th April, 2012, 07:05 PM
what kind of battery charger do you use for bmw that can hold car for 14+ volts with contact ON

ecutuners
28th April, 2012, 07:27 PM
Just use any booster pack or jump leads from another car, you will never get 14v only 13.8v ;)