View Full Version : ISUZU KB280 IMMO OFF
Tkarim
27th April, 2012, 06:29 PM
can any one please help turn immo off. I have attatched dump from 93LC66 Chip
Isuzu KB280 Only immo box no ecu
year model :2001
South Africa
makura
27th April, 2012, 07:33 PM
can any one please help turn immo off. I have attatched dump from 93LC66 Chip
Isuzu KB280 Only immo box no ecu
year model :2001
South Africa
What is the problem mate?
Tkarim
28th April, 2012, 09:42 AM
Hi Mate
All keys have been lost and cant get into coding new keys
makura
28th April, 2012, 07:26 PM
Hi Mate
All keys have been lost and cant get into coding new keys
Why not?do you have pin code?What tools do you have?do you have a new key.If you give more details i might be able to help.No immo off on this car.
Tkarim
3rd May, 2012, 03:07 PM
Hi
Thanks for helping mate. Can you help get pin from the dump?
bram380
3rd May, 2012, 04:28 PM
pin code:
01C2
Tkarim
3rd May, 2012, 04:50 PM
Hi
pin code seems to be wrong
toniz
3rd May, 2012, 04:56 PM
pin 2816
good luck
makura
3rd May, 2012, 05:08 PM
2816 is the correct code,you need a new key for this car,a second hand key will not work here.
Tkarim
4th May, 2012, 08:05 AM
Hi
Pin code 100% correct. Programmed two new keys using t300 but after coding get fault code incorrect transponder key
segs
4th May, 2012, 09:31 AM
hi to remove immo
on the injector pump is the transponder module
black unit with 3 wires
remove this unit and connect the solinolde single wire to ing feed on 3pin plug
Tkarim
4th May, 2012, 11:00 AM
Hi
can this two keys be added to the dump please
KEY 1 : FF 00 E7 37 78 0B
KEY 2: FF 00 37 3D D9 0B
Thanks
makura
4th May, 2012, 11:12 AM
Are you using second hand keys?You get that code if you use second hand keys.
Tkarim
4th May, 2012, 12:58 PM
hi
its brand new keys i got from the agents
makura
4th May, 2012, 03:11 PM
try this dump with your first key,not so sure how to add the second one.
Tkarim
4th May, 2012, 06:11 PM
Hi
Not working
ruwi
28th May, 2014, 10:59 AM
Just bypass the immo, put +ive to solenoid on injector pump. I drive a KB280DT and this was done a lond time ago... Never had an issue!
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.