FORD 4000 TRAFFIC RADIO CODE

[bangreno]

Please , I'm asking for Radio Ford 4000 Traffic Code
Serial N? is M010511

[arık]

code 1588..............

[bangreno]

code 1588..............

Thanks , but 1588 is not working , After pressing Preset 5 button to validate , display return to 'CODE' , blinking.
1588 is the code the owner given.
Can you point me to another solution.
Big thanks to you.

[aissa09]

Thanks , but 1588 is not working , After pressing Preset 5 button to validate , display return to 'CODE' , blinking.
1588 is the code the owner given.
Can you point me to another solution.
Big thanks to you.
1588 is the correct code
you must connect the second ground...........

[bangreno]

1588 is the correct code
you must connect the second ground...........

Connected the 2 Gnd ( pin 2 & 6 from top to botom).
Like pict attached , but not ok.
I'm now in Lock12 :dong:

[bonus2010]

Is 'M010511' the serial number you have personally seen printed on the label attached to the metal casing?


1588 is the code the owner given
I mean, the golden rule.... never never trust the customer .. lol

[murat332]

I just locked 10 or 13?

[murat332]

yes, the serial number may be misspelled?

[bangreno]

Serial Number is M010511 , checked again

[iamthemanwork]

This radio will work perfectly once you put it back into customers car.

[bangreno]

This radio will work perfectly once you put it back into customers car.

Radio was removed from Ford Focus car because of this problem.
the owner know the Code , but Radio will not accepte the code.

Any other idea ?

[bonus2010]

I think the radio's ~~~~ed.....

The only thing I can think of is that there may be a problem with the security panel. ... maybe connections or the panel's dodgy.

At this late stage where you are about to enter another problem of 'lock 13', I'd suggest to get another panel to try and make sure connections are clean...

tbh... think the radio is about die :(

[bangreno]

I think the radio's ~~~~ed.....

The only thing I can think of is that there may be a problem with the security panel. ... maybe connections or the panel's dodgy.

At this late stage where you are about to enter another problem of 'lock 13', I'd suggest to get another panel to try and make sure connections are clean...

tbh... think the radio is about die :(

By reading Motorola MC68HC05L28 ? is there any chance to reset counters ?

[RadioChiP]

Yes -hc05L28.Yes you can change counter.But Skip securty bit!Read Mcu I will help you.

[maciupiciu]

half of visteon radio with HC05L28 in locked13 have eeprom area dump corrupt (this it's my experience), U can't reset counter with reset tool. Must reprogram the uC

[bangreno]

Yes -hc05L28.Yes you can change counter.But Skip securty bit!Read Mcu I will help you.
Big thanks , will take out HC05E28 and Read.