Civic 77960-SMG-E110-M1

[z786]

I have one of these here with me, cannot figure out what ic i shud read, can some1 plz help??

thanks

[velindro]

I have one of these here with me, cannot figure out what ic i shud read, can some1 plz help??

thanks


can you put pics? its easier!

[z786]

here mate, thanks

[morfej]

Here you have marked.

[meteor80]

It is 95640 SMD

[z786]

soldered 6 wires like in carprog manual but still wont read, any tips??

[sensadeg]

take the eeprom off the board .

[martij976]

Did many of those with Carprog... never fail..
I always clean the chip with "Brake Parts Cleaner" and blow out with air. I never removed chip off the board. Using micrograbbers (pomona, EZ-hook) connecting the pins, read and write... Double check U'r connection. Even ohmmeter helped many times. If U can't read that, probably is something wrong with U'r carprog.
good luck

Add: Hoping YOU have an original Carprog! lol

[z786]

yes mate its original :)

the part numbers not listed on there but i was hoping i wud be able to atleast read it

[z786]

managed to read it lol

here is the original dump and a dump that i cleared using under the carprog menu 77960-SMG-G110-M1

can some1 verify that the crash has been cleared plz, if not clear 4 me??

thanks guys

[mirovasi]

managed to read it lol

here is the original dump and a dump that i cleared using under the carprog menu 77960-SMG-G110-M1

can some1 verify that the crash has been cleared plz, if not clear 4 me??

thanks guys
Try this mate should work...

[srscrash]

managed to read it lol

here is the original dump and a dump that i cleared using under the carprog menu 77960-SMG-G110-M1

can some1 verify that the crash has been cleared plz, if not clear 4 me??

thanks guys

Friend, your clear file looks ok, just a little touch to adress 360 to 00 and 36F to 00, I think that is all OK !

[meteor80]

Hello.

Here You have tested solution.
Pass pm.

[technobox]

i need passs plss