View Full Version : top speed limiter
davidyeva
29th April, 2012, 10:54 PM
anyone knows how to raise the top speed limiter of 210 km/h on a siemens ecu ppd 1.5?
the ecusafe not work with these exchanges.
greetings.
ecutuners
29th April, 2012, 11:52 PM
Post original file
davidyeva
30th April, 2012, 12:51 AM
this is file ori.
thank
smokey08
30th April, 2012, 12:55 AM
Not sure about the PPD ecu, But on the bosch ecus it is stored in the eeprom. Maybe read eeprom aswell then lower the speed limit with VCDS and read both flash and eeprom again to compare.
filecloud
30th April, 2012, 12:03 PM
Hint: It is in the flash.
robertop
30th April, 2012, 12:20 PM
The speed limiter is 4C5E4 and next (210 km / h).
Test and comments.
Greetings.
davidyeva
30th April, 2012, 01:10 PM
Thank you. i'll test and comment
Regards
igornorro
2nd May, 2012, 12:59 AM
These values are those that change the EcuSafe and does not work.
Regards.
davidyeva
21st February, 2013, 04:15 PM
As I continue with a laps with limiting speed and can not find any info.Does anyone know anything about this?
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.