PDA

View Full Version : 2006 Iveco Daily 3.0 Speed Limiter



sherl645
30th April, 2012, 08:03 PM
Hi,
Today I removed the Immo from this Van using the attached dump "0281011228_off". It is a 2006 Iveco Daily 3.0. Part number of ECU is 0281 011 228. The eeprom is a 95640.

The van started van fine but is no longer speed limited. It used to be limited to 88KPH. The limiter is obviously in the EEPROM.

I have also attached the original dump.

Can anyone please modify the immo off dump to have the speed limiter working please?

Thanks in advance,
Ronan

pencho
30th April, 2012, 09:08 PM
Speed Limit
in flash 29BL800
Then read full bdm
EDC 0281011228

sherl645
30th April, 2012, 10:27 PM
Hi,
I have attached the full BDM read. I don't think the limiter can be in the flash as it was working before I changed the EEPROM contents.
Thanks,
Ronan

jovime
30th April, 2012, 11:05 PM
Hi,
I have attached the full BDM read. I don't think the limiter can be in the flash as it was working before I changed the EEPROM contents.
Thanks,
Ronan

?Do you have a slave CMD? That file is encrypted.

sherl645
30th April, 2012, 11:11 PM
Hi,
Thanks. I only have a clone Bdm100. Are you sure it's encrypted? I didn't actually look at the file but I will in the morning.
Are you sure it can't be enabled in the eeprom?
Thanks,
Ronan

jovime
30th April, 2012, 11:17 PM
Hi,
Thanks. I only have a clone Bdm100. Are you sure it's encrypted? I didn't actually look at the file but I will in the morning.
Are you sure it can't be enabled in the eeprom?
Thanks,
Ronan

Yes, it is encrypted. Just export the flash from the file you read using advanced tab in CMD SW.

Limiter can't be enabled in the eeprom, it's in the flash ;)

sherl645
30th April, 2012, 11:23 PM
Ok, sorry I understand now. I'll do that in the morning and re-upload.

That's ok but I didn't modify the flash and I broke the limiter, I only modified the eeprom. It's strange?
Thanks for the help,
I will re-upload the file in the morning.
Thanks,
Ronan

jovime
30th April, 2012, 11:27 PM
The limiter is normally the eeprom but it can be limited using the flash, so don't worry :)

sherl645
1st May, 2012, 09:34 AM
Hi,
Here is the flash exported from the cmd program.
Thanks for the help,
Ronan

micromax
1st May, 2012, 09:52 AM
3 files extract from your full

jovime
1st May, 2012, 10:02 AM
Limiters on the flash are set to 90km/h. You did something in the eeprom that overrides the limit. I'm sorry I can't help you :)

sherl645
1st May, 2012, 11:22 AM
Ah well. Thanks for looking.

I wonder can anyone immo off my original eeprom dump?
Thanks,
Ronan

Edit: I'm going to ask in the immo section

straki007
1st May, 2012, 12:23 PM
Here is limit 130
Try and report

sherl645
2nd May, 2012, 11:21 PM
Hi,
I needed a limit at 90KM but the van is coming in tomorrow so I will try your file to see if it works.

Thanks,
Ronan

jovime
4th May, 2012, 12:38 PM
Here is limit 130
Try and report

Limit was already at 90, he wants it at 90 and you mod it for 130...

Didn't you see that when modding the file?

It will work the same as he has now. He did something in the eeprom that overrides the speed limiter, it's that simple.

Sherl645, if you're going to write that file, remember to correct the checksum before doing so!

straki007
6th May, 2012, 02:09 PM
Oh.
Sorry.
I am misunderstood.
I'm sorry.

mamanacusa
8th May, 2012, 12:58 AM
Still needed the speed limiter for that car?

sherl645
9th May, 2012, 11:44 PM
Hi,
Yes I do please..
Ronan

mamanacusa
10th May, 2012, 12:15 AM
Hi,
Yes I do please..
Ronan


Post your files and i will make you limited speed for the car.

Regards

sherl645
17th May, 2012, 08:02 PM
Hi,
All the files are in the third post.
Thanks,
Ronan

sherl645
1st June, 2012, 02:35 PM
Hi,
Got this one sorted. Limiter is in EEPROM.
Ronan

tehnosoftex
26th November, 2012, 11:54 AM
Can you post the solution?

Mulatre
31st January, 2013, 03:38 PM
sherl645, can you share solution?