View Full Version : Mitsubishi fuso pin out
rastus86
5th May, 2012, 09:45 AM
has anyone got a Mitsubishi fuso pin out for this dash cluster so i can power it up on the bench ?
rastus86
6th May, 2012, 11:58 AM
anyone i forgot to say it was a vdo type dash
PanN
18th October, 2012, 02:52 PM
any correct tacho in this car?
rastus86
21st October, 2012, 11:10 AM
i still don't have a pin out for this dash yet
rastus86
16th November, 2012, 05:54 AM
anyone able to help i have had another one now
sanjaycip
16th November, 2012, 08:28 AM
search for m post and you'll see how
rastus86
16th November, 2012, 11:30 AM
already done that
nomis
16th November, 2012, 08:57 PM
Mate open this and take clear pictures from back side ! Or start from eeprom ground to dash plug with multi meter (with beep) it is your ground . Then eeprom pin8 to regulator ..to a diode ..to dash plug it is your 12v ..
rastus86
17th November, 2012, 02:10 AM
Mate open this and take clear pictures from back side ! Or start from eeprom ground to dash plug with multi meter (with beep) it is your ground . Then eeprom pin8 to regulator ..to a diode ..to dash plug it is your 12v ..
yes i have pinned it out i find that it must have a second battery or ignition supply to run the dash which i can not find
also i am not able to pin-out the truck as i would like
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.