View Full Version : Bosch Kefico Me 7.9.8 Pinout
Dobermann
5th May, 2012, 11:09 AM
Hello friends
i have to tune a Hyundai I30 Sport with a Bosch Kefico ECU
i need Pinout from ECU ME7.9.8
did someone know where are the pinouts for flash st10 ??
thanks for info
best regards !!
toximatic
2nd July, 2012, 04:54 AM
i wish someone would help on this thread .. I really need that too bro .. did you manage to read/write this ecu ?
Novik_UA
2nd July, 2012, 09:54 PM
2 - GND
82 - +12V
83 - +12V
84 - CAN-H
62 - CAN-L
85 - K-line
104 pin of ST10 to ground via 6kOm, and 105 +12V via 6kOm (or remove resistance from it)
speedy100
2nd July, 2012, 10:14 PM
Hello friends
i have to tune a Hyundai I30 Sport with a Bosch Kefico ECU
i need Pinout from ECU ME7.9.8
did someone know where are the pinouts for flash st10 ??
thanks for info
best regards !!
Here is a .pdf for You :)
toximatic
5th November, 2012, 03:11 AM
I managed to do it but needs to raise pins at the 74 ic to achieve full read/write
speedy100
6th November, 2012, 10:24 AM
I managed to do it but needs to raise pins at the 74 ic to achieve full read/write
What tool do You use for this job and what pins are these please?
B.R.
Novik_UA
6th November, 2012, 12:00 PM
Make that ECU like in post #3
104 pin of ST10 to ground via 6kOm, and 105 +12V via 6kOm (or remove resistance from it)
And not need to raise pins from 74hc
haroldhernan1986
26th December, 2015, 03:40 AM
Make that ECU like in post #3
104 pin of ST10 to ground via 6kOm, and 105 +12V via 6kOm (or remove resistance from it)
And not need to raise pins from 74hc
Hello friends
i have to tune a Hyundai I30 Sport with a Bosch Kefico ECU
i need Pinout from ECU ME7.9.8
did someone know where are the pinouts for flash st10 ??
elkarshofy
2nd January, 2021, 12:57 AM
Here is a .pdf for You :)
thank you so much
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.