PDA

View Full Version : BDM100 - 93C46 and HC11 dumps needed



VTS_Tibi
6th May, 2012, 10:36 AM
Hi Guys,

I would like to update my BDM100 to 1255. I've uploaded the versions I found here in DK which made the interface recognized by CMD software, but when I click on the "ON" button the relay will not click and I get:



Ver. 3.1.0.1255 Dongle ID: 192

Interface Comunication Error
+12Vcc power error or Communication error


The mains power adapter is connected, so as an ECU (with good pin order).
So, could someone post me a good working pair of dumps for either the Atmel 93C46 and the HC11?

Thanks! :)

VTS_Tibi
6th May, 2012, 10:58 AM
I just checked that now it does not matter if I plug the USB cable into the PC or not, the CMD software gives the same error!

So it must be a problem with the dumps I had...

luiggii79
6th May, 2012, 11:24 AM
I just checked that now it does not matter if I plug the USB cable into the PC or not, the CMD software gives the same error!

So it must be a problem with the dumps I had...
ezzel probald hejrealitni csomagold ki es van benne 2 file eloszor sorba klikkelj rajuk ha nem mukodik probad 2 es 1
ne feledd a hardra masolni

try this file good luck!

VTS_Tibi
6th May, 2012, 03:15 PM
ezzel probald hejrealitni csomagold ki es van benne 2 file eloszor sorba klikkelj rajuk ha nem mukodik probad 2 es 1
ne feledd a hardra masolni

try this file good luck!

I already had that file, but it does not help :(

rasequia
6th May, 2012, 03:40 PM
Maybe you need this.

niwat_spp
6th May, 2012, 03:44 PM
http://www.digital-kaos.co.uk/forums/f152/need-dump-repair-my-bdm-44595/index2.html

VTS_Tibi
7th May, 2012, 07:05 AM
Thanks Guys :)