View Full Version : VAG 1.9 tdi 105 cv chip tuning problems
markovojvodic
7th May, 2012, 09:10 PM
Hello ,
i had problem teo days ago with VW T5 1.9 tdi 105 while chip tuning , i chip tuned it car was running normally and second day after few starts its not starting anymore, i took ecu out and read content again , eeprom content was corrupted , but flash was ok . i reprogram eeprom again and it was ok for few starts - when i return org dump into flash this doesnt happend ? any idea ?
i had this problem on skoda octavia 2 years ago but didnt solved it i returned it to org bcs it was my friends car , any idea anyone ?
---
I am here: http://tapatalk.com/map.php?qkuinf
mislav88
7th May, 2012, 09:18 PM
what tool do you use
markovojvodic
7th May, 2012, 09:44 PM
bmd from dimmsport in both , tool isnt a problem i did at least 40 cars with it
---
I am here: http://tapatalk.com/map.php?m21btw
waldi1979
7th May, 2012, 11:43 PM
Does You use BDM to calc checksum?
If yes use Winols to calculate checksum.
gezame
8th May, 2012, 12:03 AM
Hi
Yes rigth.
Probably problem with checksum in flash or eeprom.
That year are the cars that you have had the problem?
spawns3
8th May, 2012, 12:23 AM
Mate flash again with the original dump . try the car and after 2 days read again by bdm , and mode the file . Program the ecu with mod file and read again and check the dumps.Maybe in that 2 days maybe someone try to read the file or change it .
markovojvodic
8th May, 2012, 06:21 AM
checksum was calculated with winols , and no one read the car surely , should i calc it with bdm ?
---
I am here: http://tapatalk.com/map.php?0egxf3
markovojvodic
8th May, 2012, 06:22 AM
only thing what was also strange on this car is that i couldnt write through obd neither with galleto nor with mpps nor with cmd
---
I am here: http://tapatalk.com/map.php?2g4ogo
markovojvodic
8th May, 2012, 06:23 AM
readout was possible
---
I am here: http://tapatalk.com/map.php?lislwc
markovojvodic
8th May, 2012, 06:32 AM
i dlashed again with org dump and car is on a trio for 7 days then i will try again
---
I am here: http://tapatalk.com/map.php?olm0jk
Alexx222
8th May, 2012, 11:06 AM
did u put thermal compound on the EDC16 ECU after opening? thats importand :secruity:
turboracing
8th May, 2012, 02:39 PM
wrong cheksum flash now eprom is bad you need get good epprom dump an adapt immo happend to me once tunning on a alredy tuned vw but can happen on normal also
spawns3
8th May, 2012, 02:47 PM
wrong cheksum flash now eprom is bad you need get good epprom dump an adapt immo happend to me once tunning on a alredy tuned vw but can happen on normal also
Mate the man say the car works good for 2 days , so if be eprom problem, the car does not start .
turboracing
8th May, 2012, 04:59 PM
nope spawn there is some sort of counter .couting wrong cheksum and the after maby 5to 10 starts this happend . happend to me once i took me very long time to figure that out just to say it was on a me7.5 but i belive it is same story correct me if i am wrong about this diesel
spawns3
8th May, 2012, 05:09 PM
nope spawn there is some sort of counter .couting wrong cheksum and the after maby 5to 10 starts this happend . happend to me once i took me very long time to figure that out just to say it was on a me7.5 but i belive it is same story correct me if i am wrong about this diesel
Thanks for that info , i don't know that , never appen to me . : )
markovojvodic
9th May, 2012, 02:57 PM
i will get car next week again and try i alao think izs checksumm
---
I am here: http://tapatalk.com/map.php?czkk1c
xtreem
10th May, 2012, 05:44 PM
hello
Use Galleto 1260.
Work Good on this car.
Thanks
markovojvodic
10th May, 2012, 09:03 PM
doesnt write it tried
sepistar
11th May, 2012, 02:07 PM
when you make diagnosis are all of modules instaled on this car reachable?
strange that you are not able to write on obd.
best regards
pablo1971
11th May, 2012, 03:40 PM
galleto 1260 will be hit and miss on this car,as its edc16....
mpps-bdm-all work 100% on these
markony79
11th May, 2012, 08:50 PM
solution
1.check the errors in ECU,and dash
or
2.use good power adapter and write original file (minimum 12,5v and up and 5a)
the post whats hapends
markovojvodic
12th May, 2012, 09:11 AM
with org file everything is ok, i believe its chk problem i will now next week when van returns to me
---
I am here: http://tapatalk.com/map.php?idoe12
markovojvodic
18th June, 2012, 07:43 AM
Solved it was onky chk problem i used dimsport sw for calculation and everything is ok
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.